DROPS Merino Extra Fine
DROPS Merino Extra Fine
100% Wool
from 4.55 $ /50g
Get the yarn to make this pattern from 36.40$.

The yarn cost is calculated from the pattern’s smallest size and the yarn’s cheapest product type. Looking for an even better price? You might find it on the DROPS Deals!

DROPS Super Sale

Run Run Rudolph

Knitted onesie for children, with round yoke in DROPS Merino Extra Fine. The piece is worked top down with Nordic pattern. Sizes 12 months – 6 years.

DROPS Children 32-3
DROPS Design: Pattern no me-045-bn
Yarn group B
-----------------------------------------------------------

Sizes: 12/18 months - 2 - 3/4 - 5/6 years
Size equivalent to height of child in cm:
80/86 - 92 - 98/104 - 110/116
Height of child in feet: 2ft7/2ft9 – 3 ft - 3ft3/3ft5 – 3ft7/3ft9
Finished measurements:
Chest measurements: 56-60-64-68 cm = 22”-23 5/8”-26 1/4”-26 3/4”
Full length: 71-79-93-103 cm = 28”-31”-36 1/4”-40 1/2”

All measurements in charts are in cm.

Materials:
DROPS MERINO EXTRA FINE from Garnstudio (belongs to yarn group B)
300-300-350-400 g color 07, light brown
50-50-50-100 g color 01, off white
50-50-50-50 g color 11, red

-------------------------------------------------------
ACCESSORIES FOR THE PIECE:

KNITTING GAUGE:
21 stitches in width and 28 rows in height with stockinette stitch = 10 x 10 cm.

NEEDLES:
DROPS DOUBLE POINTED NEEDLES SIZE 4 MM = US 6 – for stockinette stitch on sleeves.
DROPS CIRCULAR NEEDLE SIZE 4 MM = US 6: length 40 cm = 16” and 60 cm = 24” or 80 cm = 32” for stockinette stitch.
DROPS DOUBLE POINTED NEEDLES SIZE 3 MM = US 2,5 – for rib on sleeves.
DROPS CIRCULAR NEEDLE SIZE 3 MM = US 2,5: length 60 cm = 24” or 80 cm = US 32” for rib.
The needle size is only a guide. If you have too many stitches on 10 cm = 4”, change to a larger needle size. If you have too few stitches on 10 cm = 4”, change to a smaller needle size.

CROCHET HOOK:
DROPS CROCHET HOOK SIZE 3 MM = US C: for noses.

DROPS WOOD BUTTONS, Oak NO 503: 5-6-7-7 items.

-------------------------------------------------------

Alternative Yarn – See how to change yarns here
Yarn Groups A to F – Use the same pattern and change the yarn here
Yarn usage using an alternative yarn – Use our yarn converter here

-------------------------------------------------------

DROPS Merino Extra Fine
DROPS Merino Extra Fine
100% Wool
from 4.55 $ /50g
Get the yarn to make this pattern from 36.40$.

The yarn cost is calculated from the pattern’s smallest size and the yarn’s cheapest product type. Looking for an even better price? You might find it on the DROPS Deals!

DROPS Super Sale

SAVE 30% on 6 cotton favorites!
Valid until 04.12.2024

Pattern instructions

NOTE: This pattern is written in American English. All measurements in charts are in cm. For conversion from inches to cm - click here. There are different terms for crocheting in American and British English. If this pattern includes crochet, click for "crochet terms" here. For this pattern in British English, please click here.
-------------------------------------------------------

EXPLANATIONS FOR THE PATTERN:

-------------------------------------------------------

RIDGE/GARTER STITCH (worked back and forth):
1 ridge = Knit 2 rows.

PATTERN:
See diagrams A.1 and A.2. Choose diagram for your size. The whole pattern is worked in stockinette stitch.

KNITTING TIP (for bands):
The whole band is worked in light brown. In other words use 1 ball of light brown for each band where needed (i.e. on the rows where light brown is not part of the pattern).
Change strand between band and body (so you do not get a change of strands outermost on band). When changing strand, twist the strands together so that the stitches stay together.

DECREASE/INCREASE TIP:
To work out when to decrease/increase on the row, count the total number of stitches on the needle (e.g. 84 stitches), minus the bands (= 74 stitches) and divide by the number of decreases/increases to be made (e.g. 7) = 10.6. In this example, decrease by alternately working together each 9th and 10th stitch and each 10th and 11th stitch (approx.), or increase alternately after each 10th and 11th stitch (approx.) by making 1 yarn over (the yarn overs are worked twisted on the next row to avoid holes – NOTE: Do not decrease/increase over bands).

INCREASE TIP (for sides of body):
Increase 1 stitch on each side of marker thread as follows: Start 2 stitches before marker thread, make 1 yarn over, work 4 stitches (marker thread sits in the middle of these 4 stitches), make 1 yarn over (= 2 stitches increased). On the next row work the yarn overs twisted to avoid holes.

DECREASE TIP (for mid under sleeve and inside of leg):
Decrease 1 stitch on each side of the marker thread as follows: Start 3 stitches before the marker thread, knit 2 together, knit 2 (marker thread sits between these 2 stitches), slip 1 stitch as if to knit, knit 1 and pass the slipped stitch over the knitted stitch (= 2 stitches decreased).

BUTTONHOLES:
Work buttonholes on right band (when the garment is worn). 1 buttonhole = start from the wrong side and knit together stitches 2 and 3 from the edge, make 1 yarn over. On the next row knit the yarn over to leave a hole.
The first buttonhole is worked after approx. 1½-2 cm = 1/2”-3/4” on the neck, then work the next 4-5-6-6 buttonholes with approx. 8-8-7½-8 cm = 3 1/8”-3 1/8”-3”-3 1/8” between each one.

-------------------------------------------------------

START THE PIECE HERE:

-------------------------------------------------------

ONESIE:
The piece is worked back and forth with circular needle from mid front. To make measuring the length of the sleeves and legs easier, the onesie is worked top down.

NECK:
Cast on 84-88-92-96 stitches (including 5 band stitches in each side towards mid front) with circular needle size 3 mm = US 2,5 and light brown. Purl 1 row from the wrong side with 5 band stitches in GARTER STITCH – read description above, in each side of the piece. The next row is worked as follows from the right side: 5 band stitches in garter stitch, * knit 2, purl 2 *, work from *-* until there are 7 stitches left and finish with knit 2 and 5 band stitches in garter stitch. Continue the rib like this for 3 cm = 1 1/8” – remember BUTTONHOLES on right band – read description above and finish after 1 row from the right side.

YOKE:
Change to circular needle size 4 mm = US 6. Purl 1 row from the wrong side with 5 band stitches in garter stitch in each side and decrease 7-5-4-1 stitches evenly on row – read DECREASE/INCREASE TIP = 77-83-88-95 stitches. Then work an elevation in the back of the neck in stockinette stitch as follows (this gives the garment a better fit): Knit until there are 12-13-14-15 stitches left on the row, turn, tighten the strand and purl until there are 12-13-14-15 stitches left on the other side. Turn, tighten the strand and knit until there are 20-22-24-26 stitches left on the row, turn, tighten the strand and purl until there are 20-22-24-26 stitches left on the other side. Turn, tighten the strand and knit until there are 28-31-34-37 stitches left on the row, turn, tighten the strand and purl until there are 28-31-34-37 stitches left on the other side. Turn, tighten the strand and knit to end of row, then purl 1 row from the wrong side (bands worked in garter stitch). The next row is worked as follows from the right side: 5 band stitches in garter stitch, work pattern according to A.1 until there are 6 stitches left on the row – NOTE: Choose diagram for your size (= 11-12-11-12 repeats of 6-6-7-7 stitches), work A.2 (= 1 stitch) and finish with 5 band stitches in garter stitch.
Continue this pattern and increase as shown in the diagram – read KNITTING TIP and REMEMBER THE KNITTING GAUGE! When A.1 and A.2 have been completed there are 187-203-220-239 stitches on the needle.
Continue with stockinette stitch and 5 band stitches in garter stitch in each side in light brown.
On the next row from the right side increase 7-7-10-7 stitches evenly on row (do not increase over bands) = 194-210-230-246 stitches.
Work until the piece measures approx. 13-14-15-16 cm = 5 1/8”-5 1/2”-6”-6 1/4” mid front (measured without the neck).
Now divide the piece as follows: Work 29-31-34-36 stitches as before (= front piece), place the next 42-46-50-54 stitches on 1 thread for sleeve (without working then), cast on 6 new stitches on the needle, work 52-56-62-66 stitches (= back piece), place the next 42-46-50-54 stitches on 1 thread for sleeve (without working them), cast on 6 new stitches on the needle and work the remaining 29-31-34-36 stitches as before (= front piece) = 122-130-142-150 stitches.

BODY:
Insert 1 marker thread 32-34-37-39 stitches in from each side (= 58-62-68-72 stitches between marker threads for back piece). THE PIECE IS NOW MEASURED FROM HERE! Continue back and forth with stockinette stitch and 5 band stitches in garter stitch in each side towards mid front – remember BUTTONHOLES on right band. When the piece measures 10-10-12-12 cm = 4”-4”-4 3/4”-4 3/4” from where body and sleeves were divided, increase 1 stitch on each side of both marker threads – read INCREASE TIP (= 4 stitches increased). Repeat these increases when the piece measures 20-20-24-24 cm = 8”-8”-9 1/2”-9 1/2” from where body and sleeves were divided = 130-138-150-158 stitches. When the piece measures 29-31-35-38 cm =11 3/8”-12 1/4”-13 3/4”-15” from where body and sleeves were divided, finish the bands mid front. Bind off the first 3 stitches at the beginning of the next 2 rows = 124-132-144-152 stitches. Then work stockinette stitch in the round over all stitches for approx. 3 cm = 1 1/8” – the piece now measures 32-34-38-41 cm = 12 1/2”-13 3/8”-15”-16 1/8” from the armhole down and 45-48-53-57 cm = 17 3/4”-19”-21”-22 1/2” mid front (measured without neck). Now divide for the legs.

LEG:
Start mid front, change to double pointed needles size 4 mm = US 6 and work stockinette stitch in the round over the first 62-66-72-76 stitches (the remaining 62-66-72-76 stitches are left on the circular needle). Insert 1 marker thread at the beginning of the round (= inside of leg). When the leg measures 2 cm = 3/4” from the division, decrease 2 stitches on the inside of the leg – read DECREASE TIP. Decrease like this every 3rd-4th-6th-7th round a total of 10-10-11-11 times = 42-46-50-54 stitches. When the leg measures 13-18-25-31 cm = 5 1/8”-7”-9 3/4”-12 1/4” from the division increase 10 stitches evenly on round = 52-56-60-64 stitches. Change to double pointed needles size 3 mm = US 2,5 and work rib in the round (= knit 2 / purl 2) for 8-8-10-10 cm = 3 1/8”-3 1/8”-4”-4” or to desired length. On the next round increase all purl 2 to purl 3 = 65-70-75-80 stitches. Then bind off with knit over knit and purl over purl.
Place stitches from the circular needle onto double pointed needles size 4 mm = US 6 and work the other leg in the same way. The whole piece measures approx. 71-79-93-103 cm = 28”-31”-36 5/8”-40 1/2”, measured from the shoulder down.

SLEEVE:
Place stitches from the thread on the one side of the piece on double pointed needles size 4 mm = US 6 and knit up 1 stitch in each of the 6 stitches cast on under the sleeve = 48-52-56-60 stitches. Insert 1 marker thread in the middle of these 6 stitches = mid under sleeve). THE PIECE IS NOW MEASURED FROM HERE! Work stockinette stitch in the round with light brown. When the sleeve measures 2-2-1-1 cm = 3/4”-3/4”-1/8”-1/8” from where the sleeve was divided from the body, decrease 2 stitches mid under sleeve – remember DECREASE TIP. Decrease like this every 3rd-3rd-4th-4th round a total of 7-9-10-12 times = 34-34-36-36 stitches. When the sleeve measures 10-12-15-18 cm =4”-4 3/4”-6”-7” from where it was divided from the body, increase 6-6-8-8 stitches evenly on round = 40-40-44-44 stitches. Change to double pointed needles size 3 mm = US 2,5 and work rib in the round (= knit 2 / purl 2) for 8-8-10-10 cm = 3 1/8”-3 1/8”-4”-4” or to desired length. On the next round increase all purl 2 to purl 3 = 50-50-55-55 stitches. Then bind off with knit over knit and purl over purl.
Place stitches from the circular needle onto double pointed needles size 4 mm = US 6.
Work the other sleeve in the same way.

NOSES:
Crochet with red and crochet hook size 3 mm = US C as follows: Work 4 chain stitches and 1 double crochet in the 4th chain stitch from the hook, cut and fasten the strand. Work 1 nose for each reindeer (= 11-12-11-12 noses). Tie the noses to each reindeer and fasten the strands.

ASSEMBLY:
Lay the right band over the left band and sew down at the bottom with small stitches. Sew buttons onto left band.

Diagram

All measurements in charts are in cm.

symbols = light brown
symbols = red
symbols = off white
symbols = between 2 stitches make 1 yarn over with the background color in the pattern stripe; on the next round work yarn over twisted to avoid a hole
diagram
diagram
diagram

Each of our patterns has specific tutorial videos to help you.

Do you have a question? See a list of frequently asked questions (FAQ)

Knitting tension is what determines the final measurements of your work, and is usually measured per 10 x 10 cm. It is provided like so: number of stitches in width x number of rows in height - eg: 19 stitches x 26 rows = 10 x 10 cm.

The knitting tension is very individual; some people knit/crochet loosely while others work tightly. You adjust the knitting tension with the needle size, which is why the suggested needle size only serve as a guide! You need to adjust this (up or down) to ensure that YOUR knitting tension matches the knitting tension provided in the pattern. If you work with a different knitting tension than provided you will have a different yarn consumption, and your work will have different measurements than what the pattern suggests.

The knitting tension also determines which yarns can replace each other. As long as you achieve the same knitting tension you can replace one yarn with another.

See DROPS lesson: How to measure your tension/gauge

See DROPS video: How to make a gauge tension swatch

The required amount of yarn is provided in grams, eg: 450 g. To calculate how many balls you’ll need you first need to know how many grams are in 1 ball (25g, 50g or 100g). This information is available if you click on the individual yarn quality on our pages. Divide the amount required with the amount of each ball. For example, if each ball is 50g (the most common amount), the calculation will be as follows: 450 / 50 = 9 balls.

The important thing when changing from one yarn to another is that the knitting/crochet tension remains the same. This is so that the measurements of the finished piece will be the same as on the sketch provided. It is easier to achieve the same knitting tension using yarns from the same yarn group. It is also possible to work with multiple strands of a thinner yarn to achieve the knitting tension of a thicker one. Please try our yarn converter. We recommend you to always work a test swatch.

Please NOTE: when changing yarn the garment might have a different look and feel to the garment in the photo, due to individual properties and qualities of each yarn.

See DROPS lesson: Can I use a different yarn than the one mentioned in the pattern?

All our yarns are categorised into yarn groups (from A to F) according to thickness and knitting tension – group A contains the thinnest yarns and group F the thickest. This makes it easier for you to find alternative yarns to our patterns, should you wish to switch yarn. All yarns within the same group have a similar knitting tension and can easily replace each other. However, different yarn qualities have different structures and properties which will give the finished work a unique look and feel.

Click here for an overview of the yarns in each yarn group

At the top of all our patterns you’ll find a link to our yarn converter, which is a helpful tool should you wish to use a different yarn than suggested. By filling in the yarn quality you wish to replace, the amount (in your size) and number of strands, the converter will present good alternative yarns with the same knitting tension. Additionally it will tell you how much you’ll require in the new qualities and whether you’ll need to work with multiple strands. Most skeins are 50g (some are 25g or 100g).

If the pattern is worked with multiple colours, every colour will have to be converted separately. Similarly, if the pattern is worked with several strands of different yarns (for example 1 strand Alpaca and 1 strand Kid-Silk) you will have to find alternatives for each, individually.

Click here to see our yarn converter

Since different yarns have different qualities and textures we have chosen to keep the original yarn in our patterns. However, you can easily find options among our available qualities by using our yarn converter, or simply pick a yarn from the same yarn group.

It is possible that some retailers still have discontinued yarns in stock, or that someone has a few skeins at home that they would like to find patterns for.

The yarn converter will provide both alternative yarn as well as required amount in the new quality.

If you think it's hard to decide what size to make, it can be a good idea to measure a garment you own already and like the size of. Then you can pick the size by comparing those measures with the ones available in the pattern's size chart.

You'll find the size chart at the bottom of the pattern.

See DROPS lesson: How to read size chart

The needle size provided in the pattern serves only as a guide, the important thing is to follow the knitting tension. And since knitting tension is very individual, you will have to adjust the needle size to ensure that YOUR tension is the same as in the pattern – maybe you’ll have to adjust 1, or even 2 needle sizes, up or down to achieve the correct tension. For this, we recommend that you work test swatches.

Should you work with a different knitting tension than the one provided, the measurements of the finished garment might deviate from the measurement sketch.

See DROPS lesson: How to measure your tension/gauge

See DROPS video: How to make a gauge tension swatch

Working a garment top-down provides more flexibility and room for personal adjustment. For example it is easier to try the garment on while working, as well as making adjustments to length of yoke and shoulder caps.

The instructions are carefully explaining every step, in the correct order. Diagrams are adjusted to the knitting direction and are worked as usual.

The diagram depicts all rows/rounds, and every stitch seen from the right side. It is read from bottom to top, from right to left. 1 square = 1 stitch.

When working back and forth, every other row is worked from the right side and every other row is worked from the wrong side. When working from the wrong side, the diagram will have to be worked reversed: from left to right, knit stitches are purled, purl stitches are knit etc.

When working in the round every round is worked from the right side and the diagram are worked from right to left on all rounds.

See DROPS lesson: How to read knitting diagrams

The diagram depicts all rows/rounds, and every stitch seen from the right side. It is worked from bottom to top, from right to left.

When working back and forth every other row is worked from the right side: from right to left and every other row is worked from the wrong side: from left to right.

When working in the round, every row in the diagram are worked from the right side, from right to left.

When working a circular diagram you start in the middle and work your way outwards, counter clockwise, row by row.

The rows usually start with a given number of chain stitches (equivalent to the height of the following stitch), this will either be depicted in the diagram or explained in the pattern.

See DROPS lesson: How to read crochet diagrams

Instructions for working several diagrams after each other on the same row/round, will often be written like so: “work A.1, A.2, A.3 a total of 0-0-2-3-4 times". This means you work A.1 once, then A.2 is worked once, and A.3 is repeated (in width) the number of times provided for your size – in this case like so: S = 0 times, M = 0 times, L=2 times, XL= 3 times and XXL = 4 times.

The diagrams are worked as usual: begin with the first row in A.1, then work the first row in A.2 etc.

See DROPS lesson: How to read knitting diagrams

See DROPS lesson: How to read crochet diagrams

The total width of the garment (from wrist-to-wrist) will be larger in the larger sizes, despite the actual sleeves being shorter. The larger sizes have longer sleeve caps and wider shoulders, so there will be a good fit in all sizes.

The measurement sketch/schematic drawing provides information regarding the full length of the garment. If it’s a jumper or a jacket the length is measured from the highest point on the shoulder (usually closest to the neckline), and straight down to the bottom of the garment. It is NOT measured from the tip of shoulder. Similarly, the length of yoke is measured from the highest point on the shoulder and down to where yoke is split into body and sleeves.

See DROPS lesson: How to read a schematic drawing

Diagrams are often repeated on the round or in height. 1 repeat is the diagram the way it appears in the pattern. If it says to work 5 repeats of A.1 in the round, then you work A.1 a total of 5 times after/next to each other in the round. If it says to work 2 repeats of A.1 vertically/in height you work the entire diagram once, then begin again at the start and work the entire diagram one more time.

Chain stitches are slightly narrower than other stitches and to avoid working the cast-on edge too tight, we simply chain more stitches to begin with. The stitch count will be adjusted on the following row to fit the pattern and measurement sketch.

The rib edge is more elastic and will contract slightly compared to, for example, stocking stitch. By increasing before the rib edge, you avoid a visible difference in width between the rib edge and the rest of the body.

It’s very easy to cast off too tightly, and by making yarn overs while casting off (and simultaneously casting these off) you avoid a too tight cast off edge.

See DROPS video: How to bind off with yarn overs (yo)

To achieve an even increase (or decrease) you can increase on, for example: every 3rd and 4th row alternately, like so: work 2 rows and increase on the 3rd row, work 3 rows and increase on the 4th. Repeat this until the increase is complete.

See DROPS lesson: Increase or decrease 1 st on every 3rd and 4th row alternately

Should you prefer to work in the round instead of back and forth, you may of course adjust the pattern. You’ll need to add steeks mid-front (usually 5 stitches), and follow the instructions. When you would normally turn and work from the wrong side, simply work across the steek and continue in the round. At the end you’ll cut the piece open, pick up stitches to work bands, and cover the cut edges.

See DROPS video: How to knit steeks and cut open

Should you prefer to work back and forth instead of in the round, you may of course adjust the pattern so you work the pieces separately and then assemble them at the end. Divide the stitches for the body in 2, add 1 edge stitch in each side (for sewing) and work the front and back pieces separately.

See DROPS lesson: Can I adapt a pattern for circular needles into straight needles?

Pattern repeats can vary slightly in the different sizes, in order to get the correct proportions. If you’re not working the exact same size as the garment in the photo, yours might deviate slightly. This has been carefully developed and adjusted so that the complete impression of the garment is the same in all sizes.

Make sure to follow instructions and diagrams for your size!

If you have found a pattern you like which is available in women’s size it’s not very difficult to convert it to men’s size. The biggest difference will be the length of sleeves and body. Start working on the women size that you think would fit across the chest. The additional length will be worked right before you cast off for the armhole/sleeve cap. If the pattern is worked top-down you can add the length right after the armhole or before the first decrease on sleeve.

Regarding additional yarn amount, this will depend on how much length you add, but it is better with a skein too many than too few.

All yarns will have excess fibres (from production) that might come off as lint or shedding. Brushed yarns (ie hairier yarns) have more of these loose, excess fibres, causing more shedding.

Shedding also depends on what is worn under or over the garment, and whether this pulls at the yarn fibres. It’s therefore not possible to guarantee that there will be no shedding

Below are some tips on how to get the best result when working with hairier yarns:

1. When the garment is finished (before you wash it) shake it vigorously so the looser hairs come off. NOTE: do NOT use a lint roller, brush or any method that pulls at the yarn.

2. Place the garment in a plastic bag and put it in your freezer - the temperature will cause the fibres to become less attached to each other, and excess fibres will come off easier.

3. Leave in the freezer for a few hours before taking it out and shaking it again.

4. Wash the garment according to the instructions on the yarn label.

Pilling is a natural process that happens to even the most exclusive of fibers. It's a natural sign of wear and tear that is hard to avoid, and that is most visible in high friction areas of your garment like a sweater's arms and cuffs.

You can make your garment look as new by removing the pilling, using a fabric comb or a pill/lint remover.

Still can't find the answer you need? Then scroll down and leave your question so one of our experts can try to help you. This will be done normally within 5 to 10 working days.
In the meantime, you can read the questions and answers that others have left to this pattern or join the DROPS Workshop on Facebook to get help from fellow knitters/crocheters!

You might also like...

Post a comment to pattern DROPS Children 32-3

We would love to hear what you have to say about this pattern!

If you want to leave a question, please make sure you select the correct category in the form below, to speed up the answering process. Required fields are marked *.

Comments / Questions (5)

country flag Brigitte Keslich wrote:

Hallo, kann es sein, dass ein Fehler im Diagramm A1 12/18+2 in der zweiten Reihe ist. In der Reihe 1 wird 1 Masche pro Diagramm zugenommen. In Reihe sind es auf einmal 2 Maschen mehr. Gibt es hierzu eine Korrektur?

12.07.2022 - 21:54

DROPS Design answered:

Liebe Brigitte, In der ersten Reihe sind 2 Zunahmen: eine nach der ersten Masche von A.1 und die andere am Ende des Rapports, nach der 6. Masche.

24.07.2022 - 20:10

country flag Anne wrote:

Hallo, ich will jetzt die Passe stricken. Muss ich mit A2 anfangen und danach A1 und A2 im Wechsel ?

12.10.2021 - 23:25

DROPS Design answered:

Liebe Anne, die Passe stricken Sie so: 5 Blenden-Maschen krausrechts, wiederholen Sie jetzt Diagram A.1 bis 6 Maschen übrig sind (= je nach der Größe 11 oder 12 Rapporte à 6-7 Maschen), dann stricken Sie A.2 (= 1 Masche) und 5 BlendenMaschen kraus rechts. Bei den Rückreihen stricken Sie: A.2, dann A.1 wiederholen aber jetzt von links nach rechts lesen. Viel Spaß beim stricken!

13.10.2021 - 08:09

country flag Margaretha Olsson wrote:

Såg just var jag gjort fel!

26.02.2021 - 15:56

country flag Margaretha Olsson wrote:

Fastnar på mönstret A1 3/4 år. 4e varvet ser ut att vara en maska mer i rapporten än vad det blir med bara en ökning i rapporten på varv 3. Jag får inte ihop det.

26.02.2021 - 15:52

DROPS Design answered:

Hej Margaretha. Du har 2 ökningar på varv 3 i diagram A.1. Du har ett omslag mellan maska nr 1 och 2 och ett omslag efter sista maskan i diagrammet. Mvh DROPS Design

01.03.2021 - 09:52

country flag Ginet DuPerron wrote:

Vraiment original et très chaud.

17.08.2020 - 20:07