DROPS Air
DROPS Air
65% Alpaca, 28% Polyamide, 7% Wool
from 6.45 $ /50g
Get the yarn to make this pattern from 32.25$.

The yarn cost is calculated from the pattern’s smallest size and the yarn’s cheapest product type. Looking for an even better price? You might find it on the DROPS Deals!

DROPS Super Sale

Caught in the Middle

Knitted sweater in DROPS Air. The piece is worked top down with round yoke and stripes. Sizes S - XXXL.

DROPS 213-13
DROPS Design: Pattern no ai-263
Yarn group C or A + A
-------------------------------------------------------

SIZES:
S - M - L - XL - XXL – XXXL

Finished measurements:
Chest measurements: 92-100-108-116-126-138 cm = 36 1/4”-39 3/8”-42 1/2”-45 3/4”-49 1/2”-54 1/4”
Full length: 49-52-54-56-58-60 cm = 19 1/4”-20 1/2”-21 1/4”-22”-22 3/4”-23 5/8”

All measurements in chart are in cm.

MATERIALS:
DROPS AIR from Garnstudio (belongs to yarn group C)
200-250-250-250-300-300 g color 01, off white
50-50-100-100-100-100 g color 15, purple haze

KNITTING GAUGE:
16 stitches in width and 20 rows in height with stockinette stitch = 10 x 10 cm = 4” x 4”.

NEEDLES:
DROPS DOUBLE POINTED NEEDLES SIZE 5.5 MM = US 9.
DROPS CIRCULAR NEEDLE SIZE 5.5 MM = US 9: Length 40 cm = 16” and 80 cm = 32” for stockinette stitch.
DROPS DOUBLE POINTED NEEDLES SIZE 4 MM = US 6.
DROPS CIRCULAR NEEDLE SIZE 4 MM = US 6: Length 40 cm = 16” and 80 cm = 32” for rib.
Needle size is only a guide. If you get too many stitches on 10 cm = 4”, change to a larger needle size. If you get too few stitches on 10 cm = 4”, change to a smaller needle size.

-------------------------------------------------------

Alternative Yarn – See how to change yarns here
Yarn Groups A to F – Use the same pattern and change the yarn here
Yarn usage using an alternative yarn – Use our yarn converter here

-------------------------------------------------------

DROPS Air
DROPS Air
65% Alpaca, 28% Polyamide, 7% Wool
from 6.45 $ /50g
Get the yarn to make this pattern from 32.25$.

The yarn cost is calculated from the pattern’s smallest size and the yarn’s cheapest product type. Looking for an even better price? You might find it on the DROPS Deals!

DROPS Super Sale

SAVE 30% on 6 cotton favorites!
Valid until 04.12.2024

Pattern instructions

NOTE: This pattern is written in American English. All measurements in charts are in cm. For conversion from inches to cm - click here. There are different terms for crocheting in American and British English. If this pattern includes crochet, click for "crochet terms" here. For this pattern in British English, please click here.
-------------------------------------------------------

EXPLANATIONS FOR THE PATTERN:

-------------------------------------------------------

PATTERN (for increases on yoke):
See diagram A.1. Choose diagram for your size.

INCREASE/DECREASE TIP (evenly spaced):
To work out how to increase/decrease evenly, count the total number of stitches on needle (e.g. 216 stitches) and divide by the number of increases/decreases to be made (e.g. 4) = 54. In this example, increase by making 1 yarn over after each 54th stitch. On the next row knit the yarn overs twisted to avoid holes.
When decreasing, knit each 53rd and 54th stitch together.

STRIPES:
* Work 2 rounds of stockinette stitch with purple haze, 1 round of stockinette stitch with off-white *, work from *-* for 15-15-17-17-18-18 cm = 6”-6”-6 3/4”-6 3/4”-7”-7”, then work 4 rounds with purple haze. The striped section measures a total of approx. 17-17-19-19-20-20 cm = 6 3/4”-6 3/4”-7 1/2”-7 1/2”-8”-8” in height

DECREASE TIP (mid under sleeves):
Decrease 1 stitch on each side of the marker thread as follows: Work until there are 3 stitches left before the marker thread, knit 2 together, knit 2 (marker thread sits between these 2 stitches), slip 1 stitch as if to knit, knit 1 and pass the slipped stitch over the knitted stitch = 2 stitches decreased.

INCREASE TIP (for mid under sleeves):
Increase 1 stitch on each side of the marker thread as follows: Work 1 stitch before the marker thread, 1 yarn over, knit 2 (marker thread sits between these 2 stitches), 1 yarn over. On the next round knit the yarn overs twisted to avoid holes.

BINDING-OFF TIP:
To avoid the bind-off edge being tight you can bind off with a larger size needle. If the edge is still tight, make 1 yarn over after approx. each 4th stitch at the same time as binding off; the yarn overs are bind off as normal stitches.

-------------------------------------------------------

START THE PIECE HERE:

-------------------------------------------------------

SWEATER – SHORT OVERVIEW OF THE PIECE:
The neck and yoke are worked in the round with circular needle, top down. The yoke is divided for body and sleeves. The body is continued in the round with circular needle. The sleeves are worked in the round with double pointed needles/short circular needle, top down.

NECK:
Cast on 72-80-84-88-92-96 stitches with short circular needle size 4 mm = US 6 and off-white. Knit 1 round, then work rib in the round (= knit 2 / purl 2) for 8 cm = 3 1/8”. Knit 1 round. Insert 1 marker after the first 24-26-27-28-29-30 stitches (= approx. mid front). Then work the yoke as described below – the yoke is measured from the marker!

YOKE:
Change to circular needle size 5.5 mm = US 9 and work A.1 in the round (= 18-20-21-22-23-24 repeats of 4 stitches). Increase as shown in the diagram. REMEMBER THE KNITTING GAUGE!
When A.1 has been completed there are 216-240-252-264-299-312 stitches on the needle and the piece measures approx. 13-13-13-16-17-17 cm = 5 1/8”-5 1/8”-5 1/8”-6 1/4”-6 3/4”-6 3/4” from the marker on the neck.
Continue with stockinette stitch and off-white (without increasing) until the piece measures 13-13-14-16-17-19 cm = 5 1/8”-5 1/8”-5 1/2”-6 1/4”-6 3/4”-7 1/2” from the marker in the neck. Then work STRIPES – read description above.

AT THE SAME TIME when the piece measures 14-14-15-17-19-19 cm = 5 1/2”-5 1/2”-6”-6 3/4”-7 1/2”-7 1/2” from the marker on the neck, increase 4-0-4-8-5-8 stitches evenly spaced on the round – read INCREASE/DECREASE TIP = 220-240-256-272-304-320 stitches.
When the piece measures 18-18-20-22-24-26 cm = 7”-7”-8”-8 3/4”-9 1/2”-10 1/4” from the marker on the neck, divide the yoke for the body and sleeves on the next round as follows: Place the first 42-46-48-52-60-60 stitches on 1 thread for the sleeve, cast on 6-6-6-8-8-10 new stitches on the needle (= in side under sleeve), work 68-74-80-84-92-100 stitches as before (= front piece), place the next 42-46-48-52-60-60 stitches on 1 thread for the sleeve, cast on 6-6-6-8-8-10 new stitches on the needle (= in side under sleeve) and work the remaining 68-74-80-84-92-100 stitches as before (= back piece). Cut the strands. Body and sleeves are finished separately. THE PIECE IS NOW MEASURED FROM HERE!

BODY:
= 148-160-172-184-200-220 stitches. Start the round in the middle of the 6-6-6-8-8-10 stitches cast on under the one sleeve and continue in the round with stripes as described above. When the stripes are finished continue with stockinette stitch and off-white.
Work until the piece measures 23-26-26-26-26-26 cm = 9”-10 1/4”-10 1/4”-10 1/4”-10 1/4”-10 1/4” from the division (there is approx. 4 cm = 1 1/2” left to finished length; you can try the sweater on and work to desired length).
Change to circular needle size 4 mm = US 6. Knit 1 round where you increase 28-32-32-36-40-44 stitches evenly spaced – remember INCREASE/DECREASE TIP = 176-192-204-220-240-264 stitches.
Work rib in the round (= knit 2 / purl 2) for 4 cm = 1 1/2”. Bind off with knit over knit and purl over purl – read BINDING-OFF TIP! The sweater measures approx. 49-52-54-56-58-60 cm = 19 1/4”-20 1/2”-21 1/4”-22”-22 3/4”-23 5/8” from the shoulder down.

SLEEVES:
Place the 42-46-48-52-60-60 stitches from the thread on the one side of the piece on double pointed needles/short circular needle size 5.5 mm = US 9 and knit up 1 stitch in each of the 6-6-6-8-8-10 stitches cast on under the sleeves = 48-52-54-60-68-70 stitches. Insert 1 marker thread in the middle of the new stitches mid under sleeve.
Continue in the round with stripes as on the body. When the stripes are finished, continue with stockinette stitch and off-white.
AT THE SAME TIME when the sleeve measures 3-3-3-2-2-2 cm = 1 1/8”-1 1/8”-1 1/8”-3/4”-3/4”-3/4” from the division, decrease 2 stitches mid under the sleeve – read DECREASE TIP. Decrease like this every 6-3-3-2-1-1 cm = 2 3/8”-1 1/8”-1 1/8”-3/4”-3/8”-3/8” a total of 2-3-3-5-8-8 times = 44-46-48-50-52-54 stitches.
Continue working until the sleeve measures 14 cm = 5 1/2” from the division in all sizes.

Now increase 2 stitches mid under sleeve – read INCREASE TIP. Increase like this every 2½-2½-2-2-1½-1½ cm = 7/8”-7/8”-3/4”-3/4”-1/2”-1/2” a total of 7-7-6-6-6-6 times = 58-60-60-62-64-66 stitches.
Work until the sleeve measures 37-37-35-34-32-31 cm = 14 1/2”-14 1/2”-13 3/4”-13 3/8”-12 1/2”-12 1/4” from the division (there is approx. 4 cm = 1 1/2” left to finished length; you can try the sweater on and work to desired length). NOTE: Shorter measurements in larger sizes due to wider neck and longer yoke.
Knit 1 round where you decrease 26-28-24-26-24-26 stitches evenly spaced = 32-32-36-36-40-40 stitches.
Change to double pointed needles size 4 mm = US 6 and work rib (= knit 2 / purl 2) for 4 cm = 1 1/2”. Bind off with knit over knit and purl over purl – remember BINDING-OFF TIP! The sleeve measures approx. 41-41-39-38-36-35 cm = 16 1/8”-16 1/8”-15 1/4”-15”-14 1/4”-13 3/4” from the division. Work the other sleeve in the same way.

Diagram

All measurements in charts are in cm.

symbols = knit
symbols = between 2 stitches make 1 yarn over; on the next round knit the yarn over twisted (no hole)
diagram
diagram

Each of our patterns has specific tutorial videos to help you.

Do you have a question? See a list of frequently asked questions (FAQ)

Knitting tension is what determines the final measurements of your work, and is usually measured per 10 x 10 cm. It is provided like so: number of stitches in width x number of rows in height - eg: 19 stitches x 26 rows = 10 x 10 cm.

The knitting tension is very individual; some people knit/crochet loosely while others work tightly. You adjust the knitting tension with the needle size, which is why the suggested needle size only serve as a guide! You need to adjust this (up or down) to ensure that YOUR knitting tension matches the knitting tension provided in the pattern. If you work with a different knitting tension than provided you will have a different yarn consumption, and your work will have different measurements than what the pattern suggests.

The knitting tension also determines which yarns can replace each other. As long as you achieve the same knitting tension you can replace one yarn with another.

See DROPS lesson: How to measure your tension/gauge

See DROPS video: How to make a gauge tension swatch

The required amount of yarn is provided in grams, eg: 450 g. To calculate how many balls you’ll need you first need to know how many grams are in 1 ball (25g, 50g or 100g). This information is available if you click on the individual yarn quality on our pages. Divide the amount required with the amount of each ball. For example, if each ball is 50g (the most common amount), the calculation will be as follows: 450 / 50 = 9 balls.

The important thing when changing from one yarn to another is that the knitting/crochet tension remains the same. This is so that the measurements of the finished piece will be the same as on the sketch provided. It is easier to achieve the same knitting tension using yarns from the same yarn group. It is also possible to work with multiple strands of a thinner yarn to achieve the knitting tension of a thicker one. Please try our yarn converter. We recommend you to always work a test swatch.

Please NOTE: when changing yarn the garment might have a different look and feel to the garment in the photo, due to individual properties and qualities of each yarn.

See DROPS lesson: Can I use a different yarn than the one mentioned in the pattern?

All our yarns are categorised into yarn groups (from A to F) according to thickness and knitting tension – group A contains the thinnest yarns and group F the thickest. This makes it easier for you to find alternative yarns to our patterns, should you wish to switch yarn. All yarns within the same group have a similar knitting tension and can easily replace each other. However, different yarn qualities have different structures and properties which will give the finished work a unique look and feel.

Click here for an overview of the yarns in each yarn group

At the top of all our patterns you’ll find a link to our yarn converter, which is a helpful tool should you wish to use a different yarn than suggested. By filling in the yarn quality you wish to replace, the amount (in your size) and number of strands, the converter will present good alternative yarns with the same knitting tension. Additionally it will tell you how much you’ll require in the new qualities and whether you’ll need to work with multiple strands. Most skeins are 50g (some are 25g or 100g).

If the pattern is worked with multiple colours, every colour will have to be converted separately. Similarly, if the pattern is worked with several strands of different yarns (for example 1 strand Alpaca and 1 strand Kid-Silk) you will have to find alternatives for each, individually.

Click here to see our yarn converter

Since different yarns have different qualities and textures we have chosen to keep the original yarn in our patterns. However, you can easily find options among our available qualities by using our yarn converter, or simply pick a yarn from the same yarn group.

It is possible that some retailers still have discontinued yarns in stock, or that someone has a few skeins at home that they would like to find patterns for.

The yarn converter will provide both alternative yarn as well as required amount in the new quality.

If you think it's hard to decide what size to make, it can be a good idea to measure a garment you own already and like the size of. Then you can pick the size by comparing those measures with the ones available in the pattern's size chart.

You'll find the size chart at the bottom of the pattern.

See DROPS lesson: How to read size chart

The needle size provided in the pattern serves only as a guide, the important thing is to follow the knitting tension. And since knitting tension is very individual, you will have to adjust the needle size to ensure that YOUR tension is the same as in the pattern – maybe you’ll have to adjust 1, or even 2 needle sizes, up or down to achieve the correct tension. For this, we recommend that you work test swatches.

Should you work with a different knitting tension than the one provided, the measurements of the finished garment might deviate from the measurement sketch.

See DROPS lesson: How to measure your tension/gauge

See DROPS video: How to make a gauge tension swatch

Working a garment top-down provides more flexibility and room for personal adjustment. For example it is easier to try the garment on while working, as well as making adjustments to length of yoke and shoulder caps.

The instructions are carefully explaining every step, in the correct order. Diagrams are adjusted to the knitting direction and are worked as usual.

The diagram depicts all rows/rounds, and every stitch seen from the right side. It is read from bottom to top, from right to left. 1 square = 1 stitch.

When working back and forth, every other row is worked from the right side and every other row is worked from the wrong side. When working from the wrong side, the diagram will have to be worked reversed: from left to right, knit stitches are purled, purl stitches are knit etc.

When working in the round every round is worked from the right side and the diagram are worked from right to left on all rounds.

See DROPS lesson: How to read knitting diagrams

The diagram depicts all rows/rounds, and every stitch seen from the right side. It is worked from bottom to top, from right to left.

When working back and forth every other row is worked from the right side: from right to left and every other row is worked from the wrong side: from left to right.

When working in the round, every row in the diagram are worked from the right side, from right to left.

When working a circular diagram you start in the middle and work your way outwards, counter clockwise, row by row.

The rows usually start with a given number of chain stitches (equivalent to the height of the following stitch), this will either be depicted in the diagram or explained in the pattern.

See DROPS lesson: How to read crochet diagrams

Instructions for working several diagrams after each other on the same row/round, will often be written like so: “work A.1, A.2, A.3 a total of 0-0-2-3-4 times". This means you work A.1 once, then A.2 is worked once, and A.3 is repeated (in width) the number of times provided for your size – in this case like so: S = 0 times, M = 0 times, L=2 times, XL= 3 times and XXL = 4 times.

The diagrams are worked as usual: begin with the first row in A.1, then work the first row in A.2 etc.

See DROPS lesson: How to read knitting diagrams

See DROPS lesson: How to read crochet diagrams

The total width of the garment (from wrist-to-wrist) will be larger in the larger sizes, despite the actual sleeves being shorter. The larger sizes have longer sleeve caps and wider shoulders, so there will be a good fit in all sizes.

The measurement sketch/schematic drawing provides information regarding the full length of the garment. If it’s a jumper or a jacket the length is measured from the highest point on the shoulder (usually closest to the neckline), and straight down to the bottom of the garment. It is NOT measured from the tip of shoulder. Similarly, the length of yoke is measured from the highest point on the shoulder and down to where yoke is split into body and sleeves.

See DROPS lesson: How to read a schematic drawing

Diagrams are often repeated on the round or in height. 1 repeat is the diagram the way it appears in the pattern. If it says to work 5 repeats of A.1 in the round, then you work A.1 a total of 5 times after/next to each other in the round. If it says to work 2 repeats of A.1 vertically/in height you work the entire diagram once, then begin again at the start and work the entire diagram one more time.

Chain stitches are slightly narrower than other stitches and to avoid working the cast-on edge too tight, we simply chain more stitches to begin with. The stitch count will be adjusted on the following row to fit the pattern and measurement sketch.

The rib edge is more elastic and will contract slightly compared to, for example, stocking stitch. By increasing before the rib edge, you avoid a visible difference in width between the rib edge and the rest of the body.

It’s very easy to cast off too tightly, and by making yarn overs while casting off (and simultaneously casting these off) you avoid a too tight cast off edge.

See DROPS video: How to bind off with yarn overs (yo)

To achieve an even increase (or decrease) you can increase on, for example: every 3rd and 4th row alternately, like so: work 2 rows and increase on the 3rd row, work 3 rows and increase on the 4th. Repeat this until the increase is complete.

See DROPS lesson: Increase or decrease 1 st on every 3rd and 4th row alternately

Should you prefer to work in the round instead of back and forth, you may of course adjust the pattern. You’ll need to add steeks mid-front (usually 5 stitches), and follow the instructions. When you would normally turn and work from the wrong side, simply work across the steek and continue in the round. At the end you’ll cut the piece open, pick up stitches to work bands, and cover the cut edges.

See DROPS video: How to knit steeks and cut open

Should you prefer to work back and forth instead of in the round, you may of course adjust the pattern so you work the pieces separately and then assemble them at the end. Divide the stitches for the body in 2, add 1 edge stitch in each side (for sewing) and work the front and back pieces separately.

See DROPS lesson: Can I adapt a pattern for circular needles into straight needles?

Pattern repeats can vary slightly in the different sizes, in order to get the correct proportions. If you’re not working the exact same size as the garment in the photo, yours might deviate slightly. This has been carefully developed and adjusted so that the complete impression of the garment is the same in all sizes.

Make sure to follow instructions and diagrams for your size!

If you have found a pattern you like which is available in women’s size it’s not very difficult to convert it to men’s size. The biggest difference will be the length of sleeves and body. Start working on the women size that you think would fit across the chest. The additional length will be worked right before you cast off for the armhole/sleeve cap. If the pattern is worked top-down you can add the length right after the armhole or before the first decrease on sleeve.

Regarding additional yarn amount, this will depend on how much length you add, but it is better with a skein too many than too few.

All yarns will have excess fibres (from production) that might come off as lint or shedding. Brushed yarns (ie hairier yarns) have more of these loose, excess fibres, causing more shedding.

Shedding also depends on what is worn under or over the garment, and whether this pulls at the yarn fibres. It’s therefore not possible to guarantee that there will be no shedding

Below are some tips on how to get the best result when working with hairier yarns:

1. When the garment is finished (before you wash it) shake it vigorously so the looser hairs come off. NOTE: do NOT use a lint roller, brush or any method that pulls at the yarn.

2. Place the garment in a plastic bag and put it in your freezer - the temperature will cause the fibres to become less attached to each other, and excess fibres will come off easier.

3. Leave in the freezer for a few hours before taking it out and shaking it again.

4. Wash the garment according to the instructions on the yarn label.

Pilling is a natural process that happens to even the most exclusive of fibers. It's a natural sign of wear and tear that is hard to avoid, and that is most visible in high friction areas of your garment like a sweater's arms and cuffs.

You can make your garment look as new by removing the pilling, using a fabric comb or a pill/lint remover.

Still can't find the answer you need? Then scroll down and leave your question so one of our experts can try to help you. This will be done normally within 5 to 10 working days.
In the meantime, you can read the questions and answers that others have left to this pattern or join the DROPS Workshop on Facebook to get help from fellow knitters/crocheters!

You might also like...

Post a comment to pattern DROPS 213-13

We would love to hear what you have to say about this pattern!

If you want to leave a question, please make sure you select the correct category in the form below, to speed up the answering process. Required fields are marked *.

Comments / Questions (22)

country flag Christine wrote:

Bonjour, je commence mon tricot avec le col en côtes pour 8 cm. Quand je regarde le patron ou la photo, la forme du col est en trapèze et non cylindrique. Est-ce que je dois augmenter mon nombre de mailles initiales avant d'arriver au "yoke"? et est-ce que le début du "yoke" est toujours en côtes ou en point jersey?

10.06.2023 - 12:48

DROPS Design answered:

Bonjour Christine, tricotez les 8 cm de côtes du col, puis tricotez l'empiècement comme indiqué (en jersey en suivant A.1). Cette forme trapèze se formera automatiquement à la fin. Bon tricot!

12.06.2023 - 09:34

country flag Ingrid Van Den Bosch wrote:

Bonjour, si je comprend bien, je dois faire 2 augmentations (2 jetés) toutes les 4 mailles pour commencer les augmentations (2 augmentations par motif de 4 mailles) ? Merci

09.01.2023 - 09:31

DROPS Design answered:

Bonjour Mme Van Den Bosch, si vous parlez des diagrammes, suivez bien le diagramme approprié à votre taille en tricotant ainsi: *1 m end, 1 jeté, 1 m end, 1 jeté, 2 m end*, et répétez de *-* tout le tour pour le 1er rang de A.1. bon tricot!

09.01.2023 - 11:00

country flag Christa Böckmann wrote:

Es geht um das Modell 213-13 Frage 1. mir ist die strickfolge des Diagramm für die Passe nicht klar genug erklärt. Frage 2. Warum zunehnahmen ab unterer Ärmelmitte ? Der Arm wird doch nach unter enger....

31.10.2022 - 11:29

DROPS Design answered:

Liebe Frau Böckmann, bei der Passe strickt und nimmt man zu wie im Diagram gezeichnet, dh A.1 stricken Sie 18 bis 24 Mal (siehe Größe) in der Runde hier lesen Sie mehr über Diagramme; der Pullover hat Puffärmel, so wird es am Anfang der Ärmel zuerst abgenommen dann zugenommen - siehe ÄRMEL. Viel Spaß beim stricken!

31.10.2022 - 13:17

country flag Kitt Helen Dahle wrote:

Hei Finnes det flere hvite Drops Air med innfarging7F8636? Da skal jeg ha 2 nøster. Ellers blir det for stor fargeforskjell. Jeg strikker pattern php?id=9719&cid=1. Hilsen Kitt Dahle

19.08.2022 - 17:52

DROPS Design answered:

Hei Kitt Helen. Vi selger bare kilovis til butikker. Men ta kontakt med en butikk / en nettbutikk og hør om de har denne innfargingen. Du finner alle butikker under: Finn en butikk! Ellers så anbefaler jeg deg å bruke diverse sosiale medier for håndarbeid (f.eks DROPS Workshop), der er det mange brukere som hjelper hverandre med etterlysning av garn og partinr. mvh DROPS design

22.08.2022 - 11:39

country flag Isabelle Francesconi wrote:

Bonjour,\r\nMerci pour votre réponse. Oui, j\'ai bien compris votre explication. Ceci dit, je fais la taille M et le marueur du col ne correspond pas au milieu du devant. A 27 mailles (après le début du tour), le marqueur ne se trouve pas au milieu. Est-ce normal ? Mais, j\'ai pu continuer mon tricot, donc je pense que ca va.\r\nMerci encore.\r\nBonne journée,\r\nIsabelle

31.01.2022 - 17:26

DROPS Design answered:

Bonjour Isabelle, les tours commencent au début de la manche, pas au milieu dos, ce marqueur après la 27ème maille est juste "approximativement" au milieu devant, vous allez ensuite mesurer l'empiècement à partir de ce rang, en posant l'ouvrage à plat, comme vous commencez par la manche droite (en rond, de haut en bas), le devant sera juste après la manche, vous tricotez ensuite l'autre manche et le dos en entier (vous aurez donc plus de mailles après le marqueur jusqu'au début du tour). Bonne continuation!

31.01.2022 - 17:56

country flag Francesconi Isabelle wrote:

Suite de mon message.... De plus, le marqueur , du coup ,'est pas au milieu du devant, mais un peu sur le côté, pourquoi ? Ou il faut juste le placer après 27 mailles (?) et ne pas tricoter avec lui ? C'est juste pour mesurer l'ouvrage ? Merci beaucoup de votre réponse Bien cordialement, Isabelle

30.01.2022 - 10:03

DROPS Design answered:

Bonjour Isabelle, est-ce que la réponse précédente pourrait vous aider à comprendre? Si ce n'est pas le cas, n'hésitez pas à nous le dire, merci!

31.01.2022 - 09:41

country flag Isabelle Francesconi wrote:

Je ne comprends pas pourquoi on ne peut pas se servir du marqueur qui indique chaque debut de tour. Pour le col. Je ne comprends pas le marqueur après les 27 premières mailles. Il faut les tricoter ou non ? Pouvez-vous reexpliquer svp ?

30.01.2022 - 00:24

DROPS Design answered:

Bonjour Mme Francesconi, le marqueur qui indique le changement de tour va suivre l'ouvrage, le marqueur que l'on place après le col sert de repère pour mesurer l'empiècement, celui-ci ne doit pas bouger, il doit se trouver à environ 27 mailles (en taille L) du début du tour, ceci correspondant au milieu du devant du pull, c'est ici que vous allez mesurer la hauteur de l'empiècement plus tard. Ne tricotez pas ces mailles pour placer le marqueur, comptez simplement ces mailles pour le mettre au bon endroit. Bon tricot!

31.01.2022 - 09:24

country flag Dolly wrote:

I am knitting xs size. I have knit A1 & it measures 13cms from marker. If I start stripes now they will be on edge of shoulder. The stripes in picture begin much further down. The pattern then states to continue in off white until the piece measures 13cm. Do I knit another 13cm in off white before starting the stripes? Thank you.

13.01.2022 - 20:51

DROPS Design answered:

Dear Dolly, stripes are started only when piece measures 13 cm - before that you work yoke following diagram A.1 (increasing for round yoke) and then with off white until piece measures 13 cm from the marker, ie after the 8 cm ribbing on neck edge (= 21 cm from cast on edge). You will then divide piece for body and sleeves 5 cm afterwards (= when yoke measures 18 cm). Happy knitting!

14.01.2022 - 08:49

country flag Johanne wrote:

Jeg har lavet en strikkeprøve på pind 6, fordi jeg normalt strikker lidt strammere end de gør i opskriften. Det passer med at 10 cm i bredden svarer til 16 masker. Men i højden har jeg allerede 20 pinde ved 7,5 cm? Hvad gør jeg så?

23.02.2021 - 11:21

DROPS Design answered:

Hej Johanne, da må du følge målene i opskriften og evt strikke en pind mere imellem udtagningerne på bærestykket. God fornøjelse!

23.02.2021 - 14:54