Marie-Pierre wrote:
Bonjour, Comment faire pour coudre 10 mailles (extrémité du dessus) sur 18 rangs de point mousse (bord de l'arrière du talon) sans étirer la partie en jersey ? Merci pour vos conseils.
14.01.2023 - 16:21DROPS Design answered:
Bonjour Marie-Pierre, vous devez assembler les mailles rabattues des 5 cm jersey tricotées de chaque côté du dessus du pied le long du côté des 9 côtes mousse, autrement dit, vos 10 mailles le long des 18 rangs. Vous pouvez procéder comme une couture de manche. Bon assemblage!
16.01.2023 - 08:49Laustriat CAROLINE wrote:
Bonjour. Je désire tricoter ce modèle, mais je ne souhaite pas forcément le feutrer. Est-ce que ça change quelque chose au nombre de mailles ? Dans ce cas, faut-il choisir uniquement un modèle qui ne le soit pas. Merci et bonne année.
31.12.2020 - 08:31DROPS Design answered:
Bonjour Mme Laustriat, ce modèle doit être feutré pour convenir à la taille souhaitée une fois terminé, si vous ne souhaitez pas feutrer, il vous faudra alors soit recalculer les explications pour votre taille, soit vous orienter vers un autre modèle de chaussons non feutrés. Bon tricot!
04.01.2021 - 13:32Ania wrote:
Ik begrijp niet hoe ik het werk moet samennaaien. Kan er geen tekening of video toegevoegd worden? Dank u
11.12.2020 - 18:51Barbara Winkelmayer wrote:
Ich kann das 8. Adventkalender-Türchen nicht öffnen! Bitte um Hilfe!
08.12.2020 - 19:56
Tip Toe Holiday |
|||||||||||||
|
|
||||||||||||
Knitted and felted slippers with cables in DROPS Alaska. Piece is worked back and forth in one piece and sewn together before felting. Size: 35-46 = US 4 1/2-13 1/2. Theme: Christmas
DROPS 214-64 |
|||||||||||||
------------------------------------------------------- EXPLANATION FOR THE PATTERN: ------------------------------------------------------- GARTER STITCH (back and forth): Knit all rows. 1 ridge vertically = knit 2 rows. ------------------------------------------------------- START THE PIECE HERE: ------------------------------------------------------- SLIPPERS– SHORT OVERVIEW OF THE PIECE: Worked back and forth in one piece. When piece is done, sew slipper together and felt in washing machine. SLIPPER: EDGE AT THE BACK: Cast on 23-25-26-28 stitches on needle size 5.5 mm = US 9 with Alaska. Work 9 ridges in GARTER STITCH - read explanation above. REMEMBER THE KNITTING GAUGE! HEEL: Now work short rows to shape the heel, knit all rows (= ridges). Beginning from right side and work as follows: Knit until 1 stitch remain on row, turn and knit until 1 stitch remain on row. * Turn and knit until 1 stitch remain before previous turn, turn and knit until 1 stitch remain before previous turn *, work from *-* until 5-5-6-6 stitches remain in the middle of piece (9-10-10-11 turns in each side). Now work 1 stitch more on every turn until all stitches have been worked = 23-25-26-28 stitches. Insert a marker in the middle of row and use for measurements. UNDER SIDE: Work stitches in garter stitch and decrease 4 stitches evenly on first row = 19-21-22-24 stitches. Work in garter stitch until piece measures 18½-20-24-27 cm = 7 1/8"-8"-9 1/2"-10 5/8" from marker inserted on heel. TOE: Now work short rows to shape the toe, knit all rows (= ridges). Work as follows from right side: Knit until 1 stitch remain on row, turn and knit until 1 stitch remain on row. * Turn and knit until 1 stitch remain before previous turn, turn and knit until 1 stitch remain before previous turn *, work from *-* until 5-5-6-6 stitches remain in the middle of piece (7-8-8-9 turns in each side). Now work 1 stitch more on every turn until all stitches have been worked = 19-21-22-24 stitches. Insert 1 marker in the middle of row and use for measurements. TOP SIDE: Knit 1 row from right side and increase 3-3-2-2 stitches evenly on row = 22-24-24-26 stitches. Then work according to diagram as follows: Work 5-6-6-7 stitches in stockinette stitch, work diagram A.1 over 12 stitches, and work 5-6-6-7 stitches in stockinette stitch. Continue pattern like this. When piece measures 9-10-12-13 cm = 3 1/2"-4"-4 3/4"-5 1/8" from marker and next row is from right side, increase 2 stitches evenly on each side of A.1 (= 4 stitches increased in total - increase with yarn overs that are purled twisted on next row) = 26-28-28-30 stitches. Work in stockinette stitch and A.1 until 13½-15-19-22 cm = 5 1/4"-6"-7 1/2"-8 3/4" have been worked in total from marker and next row is from right side. Now only work over the first 5 stitches on row, slip the remaining stitches on a stitch holder. Work in stockinette stitch (knit first row from right side) and increase 1 stitch inside last stitch on every row from right side 5 times in total. Piece measures approx. 5 cm = 2" (make sure not to pull the piece). Bind off on next row from right side. Slip the outermost 5 stitches from opposite side of stitch holder back on needle (leave the middle 16-18-18-20 stitches on stitch holder). Work in stockinette stitch (knit first row from right side) and increase 1 stitch inside first stitch on every row from right side 5 times in total. Piece measures approx. 5 cm = 2" (make sure not to pull the piece). Bind off on next row from right side. Slip the remaining 16-18-18-20 stitches from stitch holder back on needle. Work 1 row with knit over knit and purl over purl. Loosely bind off by knitting on next row from right side - it is important that the bind-off is elastic to avoid a tight edge. ASSEMBLY: Sew piece together from wrong side. Fold the piece at the toe, so that over side is on top of under side. Begin by sewing the 9 ridges from back edge together with the 10 stitch bind off at the edge in the side on top side. Then sew over side and under side together edge to edge until toe. Sew the same way along the other side of slipper. Work another slipper the same way but work diagram A.2 instead of diagram A.1. FELTING: Place the slippers in the washing machine with a detergent without enzymes and optical bleach. Wash at 40 degrees with normal spin but no pre-wash. After wash shape the slipper to the correct measurements while still wet and leave to dry flat. At subsequent wash, wash as a wool garment. AFTER FELTING: If the piece is not felted enough and is too big: Wash the piece one more time in the washing machine while it is still wet add a terry towel that measures approx. 50 x 70 cm = 19 3/4" x 27 1/2" - NOTE: Do not use a short program. If the piece has been felted too much and is too small: While the piece is still wet stretch it to the correct measurements, if the piece is dry, make sure to soak it first. Remember: All subsequent washes are as a normal wool garment. |
|||||||||||||
Diagram explanations |
|||||||||||||
|
|||||||||||||
Have you made this or any other of our designs? Tag your pictures in social media with #dropsdesign so we can see them! Do you need help with this pattern?You'll find tutorial videos, a Comments/Questions area and more by visiting the pattern on garnstudio.com. © 1982-2024 DROPS Design A/S. We reserve all rights. This document, including all its sub-sections, has copyrights. Read more about what you can do with our patterns at the bottom of each pattern on our site. |
Claudia wrote:
Erst einmal tausend Dank für diese tolle Anleitung!; Habe die Schuhe mit Drops Alaska gestrickt und die Passform ist perfekt. Leider habe ich den Filzvorgang zusammen mit einem Handtuch durchgeführt, so dass das Zopfmuster nicht mehr so gut zu erkennen ist wie auf dem Foto der Anleitung. Besser etwas vorsichtiger filzen.
03.03.2021 - 11:07