DROPS Brushed Alpaca Silk
DROPS Brushed Alpaca Silk
77% Alpaca, 23% Silk
from 3.95 $ /25g
Get the yarn to make this pattern from 15.80$.

The yarn cost is calculated from the pattern’s smallest size and the yarn’s cheapest product type. Looking for an even better price? You might find it on the DROPS Deals!

DROPS Super Sale

Cooling Creek

Knitted sweater in 2 strands DROPS Brushed Alpaca Silk or 1 strand DROPS Melody. The piece is worked top down with raglan, lace pattern and ¾-length sleeves. Sizes S - XXXL.

DROPS 222-27
DROPS Design: Pattern no as-150
Yarn group C + C or D
-------------------------------------------------------

SIZES:
S - M - L - XL - XXL – XXXL

Finished measurements:
Chest measurements: 96-104-114-124-132-150 cm = 37 3/4"-41"-45"-48 3/4"-52"-59"
Full length: 50-52-54-56-58-60 cm = 19 3/4"-20 1/2"-21 1/4"-22"-22 3/4"-23 5/8"
All measurements in charts are in cm.

MATERIALS:
DROPS BRUSHED ALPACA SILK from Garnstudio (belongs to yarn group C)
200-200-200-250-250-300 g color 15, light sea green
Or use:
DROPS MELODY from Garnstudio (belongs to yarn group D)
200-200-200-250-250-300 g color 09, light sea green

KNITTING GAUGE:
13 stitches in width with lace pattern (A.1) and 2 strands Brushed Alpaca Silk or 1 strand Melody.
15 stitches in width and 17 rows in height with stockinette stitch and 2 strands Brushed Alpaca Silk or 1 strand Melody = 10 x 10 cm = 4” x 4”.

NEEDLES:
DROPS DOUBLE POINTED NEEDLES SIZE 5.5 MM = US 9.
DROPS CIRCULAR NEEDLE SIZE 5.5 MM = US 9: Length 40 cm = 16” and 80 cm = 32” for pattern.
DROPS DOUBLE POINTED NEEDLES SIZE 4.5 MM = US 7.
DROPS CIRCULAR NEEDLE SIZE 4.5 MM = US 7: Length 40 cm = 16” and 80 cm = 32” for rib.
Needle size is only a guide. If you get too many stitches on 10 cm = 4”, change to a larger needle size. If you get too few stitches on 10 cm = 4”, change to a smaller needle size.

-------------------------------------------------------

Alternative Yarn – See how to change yarns here
Yarn Groups A to F – Use the same pattern and change the yarn here
Yarn usage using an alternative yarn – Use our yarn converter here

-------------------------------------------------------

DROPS Brushed Alpaca Silk
DROPS Brushed Alpaca Silk
77% Alpaca, 23% Silk
from 3.95 $ /25g
Get the yarn to make this pattern from 15.80$.

The yarn cost is calculated from the pattern’s smallest size and the yarn’s cheapest product type. Looking for an even better price? You might find it on the DROPS Deals!

DROPS Super Sale

SAVE 30% on 6 cotton favorites!
Valid until 04.12.2024

Pattern instructions

NOTE: This pattern is written in American English. All measurements in charts are in cm. For conversion from inches to cm - click here. There are different terms for crocheting in American and British English. If this pattern includes crochet, click for "crochet terms" here. For this pattern in British English, please click here.
-------------------------------------------------------

EXPLANATIONS FOR THE PATTERN:

-------------------------------------------------------

PATTERN:
See diagram A.1.

INCREASE/DECREASE TIP (evenly spaced):
To work out how to increase/decrease evenly, count the total number of stitches on needle (e.g. 76 stitches), and divide by the number of increases/decreases to be made (e.g. 16) = 4.8. In this example, increase by making 1 yarn over after approx. each 5th stitch. On the next round work the yarn overs twisted to avoid holes. When decreasing, knit together approx. each 4th and 5th stitch.

RAGLAN:
Increase 1 stitch on each side of the marker thread as follows:
Work until there is 1 stitch left before the marker thread, make 1 yarn over, knit 2 (marker thread sits between these 2 stitches), 1 yarn over.
On the next round knit the yarn overs twisted to avoid holes. Then work the new stitches in stockinette stitch until there are enough stitches to work another complete width of A.1.

DECREASE TIP (for sleeves):
Decrease 1 stitch on either side of the marker thread as follows: Work until there are 3 stitches left before the marker thread, knit 2 together, knit 2 (marker thread sits between these 2 stitches), slip 1 stitch as if to knit, knit 1 and pass the slipped stitch over the knitted stitch.

BINDING-OFF TIP:
To avoid the bind-off edge being tight you can bind off with a larger size needle. If the edge is still tight, make 1 yarn over after approx. each 6th stitch at the same time as binding off; the yarn overs are bind off as normal stitches.

-------------------------------------------------------

START THE PIECE HERE:

-------------------------------------------------------

SWEATER – SHORT OVERVIEW OF THE PIECE:
The neck and yoke are worked in the round with circular needle, top down from the transition between back piece and right sleeve. The yoke is divided for body and sleeves and the body continued in the round with circular needle. The sleeves are worked in the round with short circular needle/double pointed needles.

NECK:
Cast on 68-72-76-80-82-88 stitches with short circular needle size 4.5 MM = US 7 and 2 strands Brushed Alpaca Silk or 1 strand Melody. Knit 1 round. Then work rib (knit 1, purl 1) in the round for 4 cm = 1 1/2". Knit 1 round where you increase 0-0-16-24-26-28 stitches evenly spaced – read INCREASE/DECREASE TIP = 68-72-92-104-108-116 stitches. Knit 1 round (yarn overs knitted twisted).
Change to circular needle size 5.5 MM = US 9. Insert a marker here; the yoke is measured from this marker!

YOKE:
Now insert 4 other markers, without working the stitches. These markers should be a different color from the marker on the neck:
Insert a marker at the beginning of the round (= in transition between back piece and right sleeve), skip 12-12-16-16-16-16 stitches, insert a marker here (in transition between right sleeve and front piece), skip 22-24-30-36-38-42 stitches, insert a marker here (in transition between front piece and left sleeve), skip 12-12-16-16-16-16 stitches, insert a marker here (in transition between left sleeve and back piece), there are 22-24-30-36-38-42 stitches left after the last marker.
Work A.1 on the whole round, with 1 knitted stitch on either side of all 4 markers (= 2 knitted stitches in each transition between body and sleeves). AT THE SAME TIME on the 2nd round (i.e. a knitted round) start to increase to RAGLAN – read description above. Increase like this every 2nd round a total of 16-18-18-18-20-24 times = 196-216-236-248-268-308 stitches.
Continue working until the piece measures 20-22-24-26-28-30 cm = 8"-8 3/4"-9 1/2"-10 1/4"-11"-11 3/4" from the marker on the neck.
Now divide for the body and sleeves on the next round as follows:
Place the first 44-48-52-52-56-64 stitches on a thread, cast on 8 stitches (= in side under the sleeve), work the next 54-60-66-72-78-90 stitches (= front piece), place the next 44-48-52-52-56-64 stitches on a thread, cast on 8 stitches (= in side under the sleeve), work the next 54-60-66-72-78-90 stitches (= back piece).
Body and sleeves are finished separately. THE PIECE IS NOW MEASURED FROM HERE.

BODY:
= 124-136-148-160-172-196 stitches. Continue in the round with A.1. The pattern should match the pattern on the yoke. When the piece measures 22-22-21-21-21-21 cm = 8 3/4"-8 3/4"-8 1/4"-8 1/4"-8 1/4"-8 1/4" from the division (adjusting so you finish after a knitted round), knit 1 round where you increase 18-20-22-24-26-30 stitches evenly spaced = 142-156-170-184-198-226 stitches. Change to circular needle size 4.5 MM = US 7 and work rib (knit 1, purl 1) for 4 cm = 2". Bind off with knit over knit and purl over purl – read BINDING-OFF TIP. The sweater measures approx. 50-52-54-56-58-60 cm = 19 3/4"-20 1/2"-21 1/4"-22"-22 3/4"-23 5/8" from the shoulder down.

SLEEVES:
Place the 44-48-52-52-56-64 stitches from the thread on the one side of the piece on short circular needle/double pointed needles size 5.5 MM = US 9 and knit up 1 stitch in each of the 8 stitches cast on under the sleeve = 52-56-60-60-64-72 stitches. Insert a marker thread in the middle of the 8 new stitches (= mid under sleeve). Start the round here and work pattern as follows: Knit 1, A.1 as before over the next 50-54-58-58-62-70 stitches, knit 1. Continue this pattern in the round. When the sleeve measures 2 cm = 3/4", decrease 1 stitch on each side of the marker thread – read DECREASE TIP. Decrease like this every 2-2-2-1½-1½-1 cm = 3/4"-3/4"-3/4"-1/2"-1/2"-3/8" a total of 4-4-4-4-4-6 times = 44-48-52-52-56-60 stitches. Continue working until the sleeve measures 25-23-21-20-18-16 cm = 9 3/4"-9"-8 1/4"-8"-7"-6 1/4" from the division. Try the sweater on and work to desired length; there is 4 cm = 1 1/2" left to finished length. Knit 1 round, where you decrease 6-8-10-8-10-12 stitches evenly spaced = 38-40-42-44-46-48 stitches. Change to double pointed needles size 4.5 MM = US 7 and work rib (knit 1, purl 1) for 4 cm = 1 1/2". Bind off with knit over knit and purl over purl – remember BINDING-OFF TIP. The sleeve measures approx. 29-27-25-24-22-20 cm = 11 3/8"-10 5/8"-9 3/4"-9 1/2"-8 3/4"-8" from the division. Work the other sleeve in the same way.

Diagram

All measurements in charts are in cm.

symbols = knit
symbols = between 2 stitches make 1 yarn over. On the next round knit the yarn over to leave a hole
symbols = knit 2 together
symbols = slip 1 stitch as if to knit, knit 1 and pass the slipped stitch over the knitted stitch
diagram

Each of our patterns has specific tutorial videos to help you.

Do you have a question? See a list of frequently asked questions (FAQ)

Knitting tension is what determines the final measurements of your work, and is usually measured per 10 x 10 cm. It is provided like so: number of stitches in width x number of rows in height - eg: 19 stitches x 26 rows = 10 x 10 cm.

The knitting tension is very individual; some people knit/crochet loosely while others work tightly. You adjust the knitting tension with the needle size, which is why the suggested needle size only serve as a guide! You need to adjust this (up or down) to ensure that YOUR knitting tension matches the knitting tension provided in the pattern. If you work with a different knitting tension than provided you will have a different yarn consumption, and your work will have different measurements than what the pattern suggests.

The knitting tension also determines which yarns can replace each other. As long as you achieve the same knitting tension you can replace one yarn with another.

See DROPS lesson: How to measure your tension/gauge

See DROPS video: How to make a gauge tension swatch

The required amount of yarn is provided in grams, eg: 450 g. To calculate how many balls you’ll need you first need to know how many grams are in 1 ball (25g, 50g or 100g). This information is available if you click on the individual yarn quality on our pages. Divide the amount required with the amount of each ball. For example, if each ball is 50g (the most common amount), the calculation will be as follows: 450 / 50 = 9 balls.

The important thing when changing from one yarn to another is that the knitting/crochet tension remains the same. This is so that the measurements of the finished piece will be the same as on the sketch provided. It is easier to achieve the same knitting tension using yarns from the same yarn group. It is also possible to work with multiple strands of a thinner yarn to achieve the knitting tension of a thicker one. Please try our yarn converter. We recommend you to always work a test swatch.

Please NOTE: when changing yarn the garment might have a different look and feel to the garment in the photo, due to individual properties and qualities of each yarn.

See DROPS lesson: Can I use a different yarn than the one mentioned in the pattern?

All our yarns are categorised into yarn groups (from A to F) according to thickness and knitting tension – group A contains the thinnest yarns and group F the thickest. This makes it easier for you to find alternative yarns to our patterns, should you wish to switch yarn. All yarns within the same group have a similar knitting tension and can easily replace each other. However, different yarn qualities have different structures and properties which will give the finished work a unique look and feel.

Click here for an overview of the yarns in each yarn group

At the top of all our patterns you’ll find a link to our yarn converter, which is a helpful tool should you wish to use a different yarn than suggested. By filling in the yarn quality you wish to replace, the amount (in your size) and number of strands, the converter will present good alternative yarns with the same knitting tension. Additionally it will tell you how much you’ll require in the new qualities and whether you’ll need to work with multiple strands. Most skeins are 50g (some are 25g or 100g).

If the pattern is worked with multiple colours, every colour will have to be converted separately. Similarly, if the pattern is worked with several strands of different yarns (for example 1 strand Alpaca and 1 strand Kid-Silk) you will have to find alternatives for each, individually.

Click here to see our yarn converter

Since different yarns have different qualities and textures we have chosen to keep the original yarn in our patterns. However, you can easily find options among our available qualities by using our yarn converter, or simply pick a yarn from the same yarn group.

It is possible that some retailers still have discontinued yarns in stock, or that someone has a few skeins at home that they would like to find patterns for.

The yarn converter will provide both alternative yarn as well as required amount in the new quality.

If you think it's hard to decide what size to make, it can be a good idea to measure a garment you own already and like the size of. Then you can pick the size by comparing those measures with the ones available in the pattern's size chart.

You'll find the size chart at the bottom of the pattern.

See DROPS lesson: How to read size chart

The needle size provided in the pattern serves only as a guide, the important thing is to follow the knitting tension. And since knitting tension is very individual, you will have to adjust the needle size to ensure that YOUR tension is the same as in the pattern – maybe you’ll have to adjust 1, or even 2 needle sizes, up or down to achieve the correct tension. For this, we recommend that you work test swatches.

Should you work with a different knitting tension than the one provided, the measurements of the finished garment might deviate from the measurement sketch.

See DROPS lesson: How to measure your tension/gauge

See DROPS video: How to make a gauge tension swatch

Working a garment top-down provides more flexibility and room for personal adjustment. For example it is easier to try the garment on while working, as well as making adjustments to length of yoke and shoulder caps.

The instructions are carefully explaining every step, in the correct order. Diagrams are adjusted to the knitting direction and are worked as usual.

The diagram depicts all rows/rounds, and every stitch seen from the right side. It is read from bottom to top, from right to left. 1 square = 1 stitch.

When working back and forth, every other row is worked from the right side and every other row is worked from the wrong side. When working from the wrong side, the diagram will have to be worked reversed: from left to right, knit stitches are purled, purl stitches are knit etc.

When working in the round every round is worked from the right side and the diagram are worked from right to left on all rounds.

See DROPS lesson: How to read knitting diagrams

The diagram depicts all rows/rounds, and every stitch seen from the right side. It is worked from bottom to top, from right to left.

When working back and forth every other row is worked from the right side: from right to left and every other row is worked from the wrong side: from left to right.

When working in the round, every row in the diagram are worked from the right side, from right to left.

When working a circular diagram you start in the middle and work your way outwards, counter clockwise, row by row.

The rows usually start with a given number of chain stitches (equivalent to the height of the following stitch), this will either be depicted in the diagram or explained in the pattern.

See DROPS lesson: How to read crochet diagrams

Instructions for working several diagrams after each other on the same row/round, will often be written like so: “work A.1, A.2, A.3 a total of 0-0-2-3-4 times". This means you work A.1 once, then A.2 is worked once, and A.3 is repeated (in width) the number of times provided for your size – in this case like so: S = 0 times, M = 0 times, L=2 times, XL= 3 times and XXL = 4 times.

The diagrams are worked as usual: begin with the first row in A.1, then work the first row in A.2 etc.

See DROPS lesson: How to read knitting diagrams

See DROPS lesson: How to read crochet diagrams

The total width of the garment (from wrist-to-wrist) will be larger in the larger sizes, despite the actual sleeves being shorter. The larger sizes have longer sleeve caps and wider shoulders, so there will be a good fit in all sizes.

The measurement sketch/schematic drawing provides information regarding the full length of the garment. If it’s a jumper or a jacket the length is measured from the highest point on the shoulder (usually closest to the neckline), and straight down to the bottom of the garment. It is NOT measured from the tip of shoulder. Similarly, the length of yoke is measured from the highest point on the shoulder and down to where yoke is split into body and sleeves.

See DROPS lesson: How to read a schematic drawing

Diagrams are often repeated on the round or in height. 1 repeat is the diagram the way it appears in the pattern. If it says to work 5 repeats of A.1 in the round, then you work A.1 a total of 5 times after/next to each other in the round. If it says to work 2 repeats of A.1 vertically/in height you work the entire diagram once, then begin again at the start and work the entire diagram one more time.

Chain stitches are slightly narrower than other stitches and to avoid working the cast-on edge too tight, we simply chain more stitches to begin with. The stitch count will be adjusted on the following row to fit the pattern and measurement sketch.

The rib edge is more elastic and will contract slightly compared to, for example, stocking stitch. By increasing before the rib edge, you avoid a visible difference in width between the rib edge and the rest of the body.

It’s very easy to cast off too tightly, and by making yarn overs while casting off (and simultaneously casting these off) you avoid a too tight cast off edge.

See DROPS video: How to bind off with yarn overs (yo)

To achieve an even increase (or decrease) you can increase on, for example: every 3rd and 4th row alternately, like so: work 2 rows and increase on the 3rd row, work 3 rows and increase on the 4th. Repeat this until the increase is complete.

See DROPS lesson: Increase or decrease 1 st on every 3rd and 4th row alternately

Should you prefer to work in the round instead of back and forth, you may of course adjust the pattern. You’ll need to add steeks mid-front (usually 5 stitches), and follow the instructions. When you would normally turn and work from the wrong side, simply work across the steek and continue in the round. At the end you’ll cut the piece open, pick up stitches to work bands, and cover the cut edges.

See DROPS video: How to knit steeks and cut open

Should you prefer to work back and forth instead of in the round, you may of course adjust the pattern so you work the pieces separately and then assemble them at the end. Divide the stitches for the body in 2, add 1 edge stitch in each side (for sewing) and work the front and back pieces separately.

See DROPS lesson: Can I adapt a pattern for circular needles into straight needles?

Pattern repeats can vary slightly in the different sizes, in order to get the correct proportions. If you’re not working the exact same size as the garment in the photo, yours might deviate slightly. This has been carefully developed and adjusted so that the complete impression of the garment is the same in all sizes.

Make sure to follow instructions and diagrams for your size!

If you have found a pattern you like which is available in women’s size it’s not very difficult to convert it to men’s size. The biggest difference will be the length of sleeves and body. Start working on the women size that you think would fit across the chest. The additional length will be worked right before you cast off for the armhole/sleeve cap. If the pattern is worked top-down you can add the length right after the armhole or before the first decrease on sleeve.

Regarding additional yarn amount, this will depend on how much length you add, but it is better with a skein too many than too few.

All yarns will have excess fibres (from production) that might come off as lint or shedding. Brushed yarns (ie hairier yarns) have more of these loose, excess fibres, causing more shedding.

Shedding also depends on what is worn under or over the garment, and whether this pulls at the yarn fibres. It’s therefore not possible to guarantee that there will be no shedding

Below are some tips on how to get the best result when working with hairier yarns:

1. When the garment is finished (before you wash it) shake it vigorously so the looser hairs come off. NOTE: do NOT use a lint roller, brush or any method that pulls at the yarn.

2. Place the garment in a plastic bag and put it in your freezer - the temperature will cause the fibres to become less attached to each other, and excess fibres will come off easier.

3. Leave in the freezer for a few hours before taking it out and shaking it again.

4. Wash the garment according to the instructions on the yarn label.

Pilling is a natural process that happens to even the most exclusive of fibers. It's a natural sign of wear and tear that is hard to avoid, and that is most visible in high friction areas of your garment like a sweater's arms and cuffs.

You can make your garment look as new by removing the pilling, using a fabric comb or a pill/lint remover.

Still can't find the answer you need? Then scroll down and leave your question so one of our experts can try to help you. This will be done normally within 5 to 10 working days.
In the meantime, you can read the questions and answers that others have left to this pattern or join the DROPS Workshop on Facebook to get help from fellow knitters/crocheters!

You might also like...

Post a comment to pattern DROPS 222-27

We would love to hear what you have to say about this pattern!

If you want to leave a question, please make sure you select the correct category in the form below, to speed up the answering process. Required fields are marked *.

Comments / Questions (34)

country flag Annelies Rennert wrote:

Hallöchen, ich möchte mich erstmal für die von Ihnen erteilte Hilfe beim stricken bedanken. Ich denke das ist auch mal notwendig. Habe diesen Pullover in abgewandelter Variante fertiggestellt. Schade das ich Ihnen kein Foto schicken kann. Das lochmuster habe ich nur bis zur brust gestrickt. Dann 2x im Wechsel rechts und lochmuster. Sieht toll aus. Liebe Grüße Annelies

27.04.2023 - 13:51

country flag Annelies Rennert wrote:

Hallo, bekomme das zick zack Muster nicht hin. Durch die zunahme verschiebt sich ja alles. Welche masche muss ich abheben u d welche stricke und welche drüber ziehen Danke

26.02.2023 - 20:46

DROPS Design answered:

Liebe Frau Rennert, dieses Video zeigt ab ca 06:30 wie so ein Lochmuster gestrickt wird -beachten Sie nur hier, daß das Lochmuster wegen Raglanzunahmen nicht verschoben wird, so daß die 2 Maschen in A.1 immer übereinander gestrickt werden und abwechslungsweise in der Höhe zusammen rechts/mit 1 M abheben, 1 M re und die abgehobene M über die gestrickte M überziehen. Viel Spaß beim stricken!

27.02.2023 - 11:02

country flag Kroner wrote:

Hallo wenn ich das Muster in runden stricke dann geht mir das Muster immer nicht aus.was mache ich falsch?

10.02.2023 - 10:38

DROPS Design answered:

Liebe Frau Kroner, das Muster sollen Sie immer über die selben 2 Maschen in der Höhe wiederholen, dh nach der 1. Zunahmen für den Raglan stricken Sie diese Zunahme rechts, dann stricken Sie das Muster wie zuvor, nach der 2. Zunahmen, können Sie 1 Extra Muster nach den Raglanmaschen + 1 Extra Rapport vor den Raglanmaschen stricken. Viel Spaß beim stricken!

10.02.2023 - 13:16

country flag Wilma wrote:

Even een vraagje, bij dit patroon moet je met dubbele draad brushed silk breien, klopt dan de naald keuze van 4,5 en 5,5 ? Bij een enkele draad is de naaldkeuze nl. Ook 4,5 en 5,5. Ik hoor het graag van je

04.02.2023 - 13:37

DROPS Design answered:

Dag Wilma,

De aanbevolen naalddikte in het patroon is 5,5 en bij het garen staat 5 mm. Het patroon is een combinatie met Kid-Silk. Je zou inderdaad een dikkere naald verwachten, maar soms is dat niet het geval om een bepaald effect te bereiken. Het belangrijkste is dat jouw stekenverhouding overeenkomt met de stekenverhouding zoals aangegeven in het patronen. Dus het is aan te raden om een proeflapje te breien en, indien nodig, de naalddikte aan te passen.

05.02.2023 - 10:53

country flag Evelyne wrote:

Bonjour, les diagrammes portent à confusion. Une case blanche = m. end. Donc sur les rangs pairs (envers du travail) on tricote à l'endroit ? Ou bien "1 maille endroit" signifie sur l'endroit du travail, on voit une maille endroit, donc on tricote du jersey endroit, donc des mailles à l'envers sur les rangs pairs ? Sur la video mentionnée en réponse à Annelies vous tricotez bien à l'envers. D'autres diagrammes sont plus explicites.

31.01.2023 - 13:03

DROPS Design answered:

Bonjour Evelyne, ce pull se tricote entièrement en rond, on n'a donc pas de rangs sur l'envers, et on va tricoter toutes les mailles du diagramme à l'endroit aux rangs impairs. Dans la vidéo, le point fantaisie est tricoté en rangs, donc on tricote à l'envers sur l'envers aux rangs pairs, mais ici on tricote en rond, donc tout à l'endroit comme l'indique le diagramme. Bon tricot!

31.01.2023 - 17:08

country flag Evelyne wrote:

Bonjour, les diagrammes portent à confusion. Une case blanche = m. end. Donc sur les rangs pairs (envers du travail) on tricote à l'endroit ? Ou bien "1 maille endroit" signifie sur l'endroit du travail, on voit une maille endroit, donc on tricote du jersey endroit, donc des mailles à l'envers sur les rangs pairs ? Sur la video mentionnée en réponse à Annelies vous tricotez bien à l'envers. D'autres diagrammes sont plus explicites.

31.01.2023 - 13:03

country flag Ines wrote:

Bitte stellen Sie das Diagramm A 1 zu der Anleitung, Es fehlt! Danke

15.01.2023 - 09:11

DROPS Design answered:

Liebe Ines, das Diagramm A.1 finden Sie neben der Maßskizze, unter dem Ärmel. Viel Spaß beim stricken!

16.01.2023 - 09:02

country flag Annelies Rennert wrote:

Hallöchen, wie muss ich das Diagramm A1 stricken? Ist nicht beschrieben. Danke Annelies Rennert

30.10.2022 - 12:14

DROPS Design answered:

Liebe Frau Rennert, A.1 finden Sie nehmen der Maßskizze, unter der Ärmel, es wird über 2 Maschen und 4 Reihen gestrickt. Viel Spaß beim stricken!

31.10.2022 - 09:04

country flag Annelies Rennert wrote:

Hallöchen, das Diagramm ist schlecht erklärt. Sind es immer neue Reihen, zb. 2 MA RECHTS zusammen stricken, dann nächste Reunde 1 MA abheben, 1 MA stricken die abgehoben darüber ziehen, oder wie verstehe ich das? Fehlt bei dem Diagramm etwas. Mfg. Annelies Rennert

09.09.2022 - 17:56

DROPS Design answered:

Liebe Frau Rennert, 1 Kästchen im Diagram = 1 Masche x 1 Runde so stricken ,Sie A.1: 1. R = (2 M rechts zs, 1 Umschlag), von (-) wiederholen; 2. + 4. R = alle Maschen rechts stricken; 3. R = (1 Umschlag, 1 Masche abheben, die nächste Masche rechts stricken und die abgehobene Masche über die gestrickte Masche ziehen) von (bis) wiederholen. Die 4 Reihen wiederholen. Dieses Video zeigt auch ab ca 06:40 (mit A.4 im Video) wie dieses Diagram (A.1 in dieser Anleitung) gestrickt wird. Viel Spaß beim stricken!

12.09.2022 - 09:09

country flag Claudia wrote:

Hola tienen un diagrama de los puntos? No entiendo cuando debe seguirlo escrito . Me es más fácil a través de un diagrama . Gracias !

01.09.2022 - 19:53

DROPS Design answered:

Hola Claudia, no tenemos un diagrama de puntos de todo el patrón, pero puedes encontrar el diagrama A.1 bajo la manga, en el esquema de medidas.

01.09.2022 - 23:40