INTRODUCTION

Divergenerate

by Amy Gunderson

I love the idea of using stitches as lines on a canvas. Sketching out a rough idea, and then using the magic of geometry and math to create a real-life representation of that sketch is super fun. This sweater was dreamt up as an exercise in another episode of "can I do this with my knitting"?

It's designed to be a bit cropped as shown. Because of the nature of the design, it's tough to adjust the length without making significant changes to some of the rates of movement and increases in the lower body. The cropped aspect, plus the narrowed waist and zipper, makes this sweater reminiscent of a sort of fancy motorcycle jacket.

A tweedy wool yarn is held together with a laceweight silk mohair blend throughout this sweater. Pieces are knit flat and seamed together, which might not seem like very much fun. But due to the shifting cables and varying raglan decreases for sleeves and body, trust me – it's much easier to follow as written. Plus, the seams give this sporty number stability and a more finished look.

model: Amy Gunderson

photos: Samantha Izquierdo

SIZE

 XS[S, M, L, 1X, 2X, 3X, 4X, 5X]
shown in size S with 5 inches/12.5 cm of ease at chest

FINISHED MEASUREMENTS

Chest circumference at underarm:  34[38.5, 43, 46.5, 51, 54.5, 59, 62.5, 67] inches / 86.5[98, 109, 118, 129.5, 138.5, 150, 159, 170] cm
Length:  16.25[17, 18.5, 18.75, 19.25, 20.5, 20.5, 21.25, 22.25] inches / 41.5[43, 47, 47.5, 49, 52, 53.5, 54, 56.5] cm

MATERIALS

Yarn
[MC1] Universal Yarn Deluxe DK Tweed Superwash [90% superwash wool, 3% viscose, 7% acrylic; 284 yd/260 m per 3.5 oz/100 g skein]; color: 403 Hazelnut; 3[4, 4, 4, 5, 5, 6, 6, 7] skeins
[MC2] Rico Design Essentials Super Kid Mohair Loves Silk, distributed by Universal Yarn [70% mohair, 30% silk; 218 yd/199 m per .88 oz/25 g skein]; color: 037 Mustard; 4[4, 5, 6, 6, 7, 8, 8, 9] skeins

Yarn Characteristics
The sample shown uses a DK-weight plied yarn that is mostly wool held together with a silk/mohair laceweight yarn. Held together, these yarns have good stitch definition, good elasticity, and a nice halo from the silk/mohair yarn. One strand of worsted weight yarn could be used instead. Make sure it's a wool or mostly wool blend, or acrylic or mostly acrylic blend, to keep the same structure and stitch definition as shown in the photos and to help the cables pop.

Recommended needle size
[always use a needle size that gives you the gauge listed below - every knitter's gauge is unique]
US #6/4mm needles for working flat
US #8/5mm needles for working flat
US Size E-4/3.5 mm crochet hook (for stabilizing front opening)

Notions
cable needle
4 stitch markers
separating zipper
sewing needle
matching thread
contrasting thread
yarn needle

GAUGE

18 sts/27 rows = 4 inches/10 cm in reverse Stockinette stitch with both yarns held together and larger needles
22 sts/27 rows = 4 inches/10 cm in any of the cable patts with both yarns held together and larger needles
18 sts/27 rows = 4 inches /10 cm in Broken Ribbing with both yarns held together and smaller needles
18 sts/27 rows = 4 inches/10 cm in Ridge Pattern with both yarns held together and larger needles

Note: gauge is always taken after blocking.

PATTERN NOTES

[Knitty's list of standard abbreviations and techniques can be found here.]

Hold 1 strand of each yarn together throughout unless otherwise noted.

Construction method: Back, fronts, and sleeves are worked flat from the bottom up. After seaming, the collar is knitted onto the assembled sweater. The zipper is added at the end after working a slip stitch edge along both front openings.

Right Twist (RT): K2tog but do not sl sts from needle, knit the first st again, sl both sts from needle.
Left Twist (LT): Knit second st on the left needle through the back loop, knit the first st, then sl both sts from needle.
C6B: Slip 3 stitches onto cable needle, hold cable needle at back of work, k3, then k3 from cable needle.
C6F: Slip 3 stitches onto cable needle, hold cable needle at front of work, k3, then k3 from cable needle.
C4B: Slip 2 stitches onto cable needle, hold cable needle at back of work, k2, then k2 from cable needle.
C4F: Slip 2 stitches onto cable needle, hold cable needle at front of work, k2, then k2 from cable needle.

CHARTS

Broken Ribbing (worked over an odd number of sts)
Row 1 [WS]: Purl.
Row 2 [RS]: *K1, p1; rep from * to last st, k1.
Rep Rows 1-2 for patt.

Broken Ribbing (worked over an even number of sts)
Row 1 [WS]: Purl.
Row 2 [RS]: *K1, p1; rep from * to end.
Rep Rows 1-2 for patt.

Ridges (any number of sts)
Row 1 [RS]: Knit.
Row 2 [WS]: Purl.
Row 3: Purl.
Row 4: Knit.
Rep Rows 1-4 for patt.

Right Traveling Column (panel of 9 sts) revised Sep 15/23
Row 1 [RS]: P1, RT, p1, k4, p1. 
Rows 2, 4, 6, 8 [WS]: K1, p4, k1, p2, k1. 
Row 3: P1, RT, p1, C4B, p1. 
Rows 5: Repeat Row 1.
Row 7: P1, RT, P1, C4F, P1.
Rep Rows 1-8 for patt. 

Left Traveling Column (panel of 9 sts) revised Sep 15/23
Row 1 [RS]: P1, k4, p1, LT, p1. 
Rows 2, 4, 6, 8 [WS]: K1, p2, k1, p4, k1. 
Row 3: P1, C4F, p1, LT, p1. 
Row 5: Repeat Row 1.
Row 7: P1, C4B, P1, LT, P1. 
Rep Rows 1-8 for patt. 

RT Column (panel of 2 sts)
Row 1 [RS]: RT.
Row 2 [WS]: P2.
Rep Rows 1-2 for patt.

LT Column (panel of 2 sts)
Row 1 [RS]: LT.
Row 2 [WS]: P2.
Rep Rows 1-2 for patt.

C6B Column (panel of 8 sts)
Row 1 [RS]: P1, k6, p1.
Row 2 [WS]: K1, p6, k1.
Row 3: P1, C6B, p1.
Row 4: K1, p6, k1.
Rep Rows 1-4 for patt.

C6F Column (panel of 8 sts)
Row 1 [RS]: P1, k6, p1.
Row 2 [WS]: K1, p6, k1.
Row 3: P1, C6F, p1.
Row 4: K1, p6, k1.
Rep Rows 1-4 for patt.

DIRECTIONS

BACK

Hem
With smaller needles, cast on 67[77, 87, 95, 105, 113, 123, 131, 141] sts.

Work Rows 1-2 of Broken Ribbing patt 7 times.

Inc row [WS]: P 14[19, 24, 28, 33, 37, 42, 46, 51] , pm, k1, p2, k1, p4, k1, pm, p2, k1, p6, k1, p1, m1p, k1, p6, k1, p2, pm, k1, p4, k1, p2, k1, pm, p 14[19, 24, 28, 33, 37, 42, 46, 51] . 1 st increased; 68[78, 88, 96, 106, 114, 124, 132, 142] sts.

Main Back
Switch to larger needles.

Row 1 [RS]: K1, work Row 1 of Ridges patt to m, sl m, work Row 1 of Right Traveling Column, sl m, work Row 1 of RT Column, work Row 1 of C6B Column, work Row 1 of RT Column, work Row 1 of C6F Column, work Row 1 of LT Column, sl m, work Row 1 of Left Traveling Column to m, sl m, work Row 1 of Ridges patt to last st, k1.

Continue in patt as est for 3 more rows, keeping the first and last st of every row in St st.

Waist Increases
Note: Read ahead! Waist increases and cable moves will occur at the same time at different rates.

Waist inc row [RS]: K1, m1L, work in patt as est to last st, m1R, k1. 2 sts increased.

Cont in patt, rep Waist Inc row every foll 4 rows 3[3, 2, 2, 2, 1, 1, 1, 0] times, then every 6 rows 4[4, 5, 5, 5, 6, 6, 6, 7] times, working inc sts into Ridges patt. 84[94, 104, 112, 122, 130, 140, 148, 158] sts.

AT THE SAME TIME, after 16[16, 16, 16, 8, 8, 8, 8, 8] Main Back rows have been worked, begin cable moves as foll:

Cable Move Row [RS]: Patt to 2 sts before m, work 2 tog in Ridge patt, sl m, work Right Traveling Column to m, sl m, m1p, patt to m, m1p, sl m, work Left Traveling Column to m, sl m, work 2 tog in ridge patt, patt to end.

Note: There will be a decrease on the outer side of both Right and Left Traveling columns, and an increase on the inner side of these columns, shifting them outward.

Rep Cable Move Row every 4 rows 14[13, 14, 13, 15, 15, 13, 12, 12] more times, then every 2 rows 2[5, 6, 9, 10, 12, 17, 20, 22] times, working increased sts in rev St st. Note that all Cable Move Rows will not be completed before raglan shaping begins.

After all Waist Increases are complete and 54[54, 58, 58, 58, 62, 62, 62, 64] Main Back rows have been worked, proceed to Raglan Shaping section.

Raglan Shaping:
Note: Continue to work Cable Move Rows as est in this section. Once you have run out of stitches to work the decreases on the outer sides, you will work the Cable Move Rows in a slightly different way: you will continue to work the increase stitches as est, but you will work the raglan decreases as double decreases (p3tog/sssp) to account for both a raglan decrease and the Cable Move. Remove markers as needed once sts from those sections are consumed.

BO 2[4, 6, 8, 10, 12, 14, 16, 18] sts at beg of next 2 rows. 80[86, 92, 96, 102, 106, 112, 116, 122] sts rem.

Dec row [RS]: K1, p1, work Row 1 of RT Column over next 2 sts, pm, p2tog, patt to last 6 sts (including any decreases and increases for Cable Move Row), ssp, pm, work Row 1 of LT Column over next 2 sts, p1, k1. 2 sts decreased.
Next row [WS]: P1, k1, work LT Column, sl m, k1, patt to 1 st before last m, k1, sl m, work RT Column, k1, p1.
Rep last 2 rows 14[17, 19, 19, 21, 23, 25, 25, 27] more times. Cable Move Rows have now been completed. 50[50, 52, 56, 58, 58, 60, 64, 66] sts.

Raglan Shaping Part 2
Dec Row [RS]: K1, p1, work RT Column, sl m, p2tog, patt to last 6 sts, ssp, sl m, work LT Column, p1, k1. 2 sts decreased.
Dec Row [WS]: P1, k1, work LT Column, sl m, ssk, patt to last 6 sts, k2tog, sl m, work RT Column, k1, p1. 2 sts decreased.
Rep last 2 rows 4[4, 4, 5, 5, 5, 5, 6, 6] more times. 30[30, 32, 32, 34, 34, 36, 36, 38] sts.

BO all sts in patt.

LEFT FRONT
Hem
With smaller needles, cast on 34[39, 44, 48, 53, 57, 62, 66, 71] sts.

Work Rows 1-2 of Broken Ribbing patt 7 times.

Next row [WS]: P1, k1, p6, k1, p2, pm, k1, p4, k1, p2, k1, pm, p 14[19, 24, 28, 33, 37, 42, 46, 51.]

Main Front
Note: Read ahead! Waist increases and cable moves will occur at the same time at different rates.

Switch to larger needles.

Row 1 [RS]: K1, work Row 1 of Ridges patt to m, sl m, work Row 1 of Right Traveling Column to m, sl m, work Row 1 of RT Column, work Row 1 of C6B Column, k1.

Continue in patt as est for 3 more rows, keeping the first and last st of every row in St st.

Waist Increases
Waist Inc row [RS]: K1, m1L, patt to end. 1 st increased.

Cont in patt, rep Waist Inc row every foll 4 rows 3[3, 2, 2, 2, 1, 1, 1, 0] times, then every 6 rows 4[4, 5, 5, 5, 6, 6, 6, 7] times, working inc sts into Ridges patt. 42[47, 52, 56, 61, 65, 70, 74, 79] sts.

AT THE SAME TIME, after 16[16, 16, 16, 8, 8, 8, 8, 8] Main Front rows have been worked, begin cable moves as foll:

Cable Move Row [RS]: Patt to 2 sts before m, patt 2 tog, sl m, work Right Traveling Column, sl m, m1p, patt to end.

Note: There will be a decrease on the outer side of the Right Traveling column and an increase on the inner side of this column, shifting it outward.

Rep Cable Move Row every 4 rows 14[13, 14, 13, 15, 15, 13, 12, 12] more times, then every 2 rows 2[5, 6, 9, 10, 12, 17, 20, 22] times, working increased sts in rev St st. Note that all Cable Move Rows will not be completed before raglan shaping begins.

Rep Cable Move Row every 4 rows 14[13, 14, 13, 15, 15, 13, 12, 12] more times, then every 2 rows 2[5, 6, 9, 10, 12, 17, 20, 22] times. Note that all Cable Move Rows will not be completed before raglan shaping begins.

After all Waist Increases are complete and 54[54, 58, 58, 58, 62, 62, 62, 64] Main Front rows have been worked, proceed to Raglan Shaping section.

Raglan Shaping
Note: Continue to work Cable Move Rows as est in this section. Once you have run out of stitches to work the decreases on the outer sides, you will work the Cable Move Rows in a slightly different way. You will continue to work the increase stitches as est. But you will work the raglan decreases as double decreases (p3tog) to account for both a raglan decrease and the Cable Move. Remove markers as needed once sts from those sections are consumed.

BO 2[4, 6, 8, 10, 12, 14, 16, 18] sts at beg of next RS row. 40[43, 46, 48, 51, 53, 56, 58, 61] sts rem.

Work 1 WS row even in patt.

Dec row [RS]: K1, p1, work Row 1 of RT Column, pm, p2tog, patt to end. 1 st decreased.
Next row [WS]: Patt to 1 st before last m, k1, sl m, RT Column, k1, p1.
Rep last 2 rows 14[17, 19, 19, 21, 23, 25, 25, 27] more times. 25[25, 26, 28, 29, 29, 30, 32, 33] sts.

Shape Raglan Part 2
Dec row [RS]: K1, p1, work RT Column, sl m, p2tog, patt to end. 1 st decreased.
Dec row [WS]: Patt to last 6 sts, k2tog, sl m, work RT Column, k1, p1. 1 st decreased.
Rep last 2 rows 0[0, 0, 1, 1, 1, 1, 2, 2] more times. 23[23, 24, 24, 25, 25, 26, 26, 27] sts.

Raglan Shaping Part 3 and Neck Shaping
Row 1 [RS]: Work Dec row [RS]. 22[22, 23, 23, 24, 24, 25, 25, 26] sts rem.
Row 2 [WS]: BO 12[12, 13, 13, 14, 14, 15, 15, 16] sts, patt to 2 sts before m, k2tog, sl m, RT Column, k1, p1. 9 sts rem.
Row 3: K1, p1, RT, p2tog, p3. 8 sts rem.
Row 4: BO 3 sts, patt to end. 5 sts rem.
Row 5: K1, p1, k1, p2tog. 4 sts rem.
Row 6: K2tog, k1, p1. 3 sts rem.
Row 7: K1, p2tog. 2 sts rem.
Row 8: K2tog.

Fasten off rem st.

RIGHT FRONT
Hem
With smaller needles, cast on 34[39, 44, 48, 53, 57, 62, 66, 71] sts.

Work Rows 1-2 of Broken Ribbing patt 7 times.

Next row [WS]: P 14[19, 24, 28, 33, 37, 42, 46, 51] , pm, k1, p2, k1, p4, k1, pm, p2, k1, p6, k1, p1.

Main Front
Note: Read through the following section before beginning. Waist increases and cable moves will occur at the same time at different rates.

Switch to larger needles.

Row 1 [RS]: K1, work Row 1 of C6F Column, work Row 1 of RT Column, sl m, work Left Traveling Column to m, sl m, work Ridges patt to last st, k1.

Continue in patt as est for 3 more rows, keeping the first and last st in St st.

Waist Increases
Waist Inc row [RS]: Patt to last st, m1R, k1. 1 st increased.

Rep Waist Inc row every 4 rows 3[3, 2, 2, 2, 1, 1, 1, 0] more times, then every 6 rows 4[4, 5, 5, 5, 6, 6, 6, 7] times, working inc sts into Ridges patt. 42[47, 52, 56, 61, 65, 70, 74, 79] sts.

AT THE SAME TIME, after 16[16, 16, 16, 8, 8, 8, 8, 8] Main Front rows have been worked, begin cable moves as foll:

Cable Move Row [RS]: Patt to m, m1P, sl m, work Left Traveling Column to m, sl m, patt 2 tog, patt to end.

Note: There will be a decrease on the outer side of the Left Traveling column and an increase on the inner side of this column, shifting it outward.

Rep Cable Move Row every 4 rows 14[13, 14, 13, 15, 15, 13, 12, 12] more times, then every 2 rows 2[5, 6, 9, 10, 12, 17, 20, 22] times. Note that all Cable Move Rows will not be completed before raglan shaping begins.

After all Waist Increases are complete and 54[54, 58, 58, 58, 62, 62, 62, 64] Main Front rows have been worked, proceed to Raglan Shaping section.

Raglan Shaping
Note: Continue to work Cable Move Rows as est in this section. Once you have run out of stitches to work the decreases on the outer sides, you will work the Cable Move Rows in a slightly different way. You will continue to work the increase stitches as est. But you will work the raglan decreases as double decreases (p3tog) to account for both a raglan decrease and the Cable Move. Remove markers as needed once sts from those sections are consumed.

Work 1 RS row even in patt.

BO 2[4, 6, 8, 10, 12, 14, 16, 18] sts at beg of next WS row. 40[43, 46, 48, 51, 53, 56, 58, 61] sts.

Dec row [RS]: Patt to last 6 sts, patt 2 tog, pm, work Row 1 of LT Column, p1, k1. 1 st decreased.
Next row: P1, k1, work LT Column, sl m, k1, patt to end.
Rep last 2 rows 14[17, 19, 19, 21, 23, 25, 25, 27] more times. 25[25, 26, 28, 29, 29, 30, 32, 33] sts rem.

Raglan Shaping Part 2
Dec row [RS]: Patt to last 6 sts, patt 2 tog, pm, work LT Column, p1, k1. 1 st decreased.
Dec row [WS]: P1, k1, work LT Column, sl m, patt 2 tog, patt to end. 1 st decreased.
Rep last 2 rows 0[0, 0, 1, 1, 1, 1, 2, 2] more times. 23[23, 24, 24, 25, 25, 26, 26, 27] sts.

Raglan Shaping Part 3 and Neck Shaping
Row 1 [RS]: BO 12[12, 13, 13, 14, 14, 15, 15, 16] sts, patt to 2 sts before m, ssp, sl m, work LT Column, p1, k1. 10 sts rem.
Row 2 [WS]: Work Dec row [WS]. 9 sts.
Row 3: BO 3 sts, patt to end. 6 sts.
Row 4: P1, k1, LT Column, ssk. 5 sts.
Row 5: Ssp, k1, p1, k1. 4 sts.
Row 6: P1, k1, ssk. 3 sts rem.
Row 7: Ssp, k1. 2 sts rem.
Row 8: Ssk.

Fasten off rem st.

Sleeves (make 2)

Cuff
With smaller needles, cast on 43[45, 45, 47, 47, 49, 49, 51, 51] sts.

Work Rows 1-2 of Broken Ribbing patt 5 times.

Next row [WS]: K 11[12, 12, 13, 13, 14, 14, 15, 15] , pm, p2, k1, p6, k1, p1, m1p, k1, p6, k1, p2, pm, k 11[12, 12, 13, 13, 14, 14, 15, 15] . 44[46, 46, 48, 48, 50, 50, 52, 52] sts.

Main Sleeve
Switch to larger needles.
Row 1 [RS]: K1, purl to m, sl m, work Row 1 of RT Column, work Row 1 of C6B Column, work Row 1 of RT Column, work Row 1 of C6F Column, work Row 1 of LT Column, sl m, purl to last st, k1.
Row 2 [WS]: P1, knit to m, sl m, work in est patt to m, sl m, knit to last st, p1.

Work in patt as est for 2 more rows.

Inc row [RS]: K1, m1p, patt to last st, m1p, k1. 2 sts increased.

Rep Inc Row every 8[6, 4, 4, 4, 4, 2, 2, 2] rows 4[4, 1, 3, 8, 14, 1, 2, 5] more time(s), then every 10[8, 6, 6, 6, 6, 4, 4, 4] rows 3[5, 10, 9, 6, 2, 17, 17, 16] more times, working increased sts into rev St st. 60[66, 70, 74, 78, 84, 88, 92, 96] sts.

Work even in patt until Sleeve measures 16.5[16.5, 16.75, 16.75, 17, 17, 17.25, 17.25, 17.5] inches/ 42[42, 42.5, 42.5, 43, 43, 44, 44, 44.5] cm, ending after a WS row.

Raglan Shaping
BO 2[4, 6, 8, 10, 12, 14, 16, 18] sts at beg of next 2 rows. 56[58, 58, 58, 58, 60, 60, 60, 60] sts.

Dec row [RS]: K1, work Row 1 of RT Column, p2tog, patt to last 5 sts, ssp, work Row 1 of LT Column, k1. 2 sts decreased.
Next row [WS]: P1, LT Column, patt to last 3 sts, RT Column, p1.
Work 2 more rows even in est patt.

Rep Dec row on next row, then every foll 4 rows 3 [5, 7, 8, 10, 11, 13, 14, 16] more times, then every 2 rows, 11[10, 8, 7, 5, 5, 3, 2, 0] times.

Work 1 WS row even in patt.

BO rem 24 sts.

FINISHING

Weave in ends. Block pieces to finished measurements. Sew raglan seams. Sew Sleeve and side seams.

Collar
With RS facing and circular needle, pick up and knit 17[17, 18, 18, 19, 19, 20, 20, 21] sts along Right Front Neck, 15 sts along top of Sleeve, 25[25, 27, 27, 29, 29, 31, 31, 33] sts along Back Neck, 15 sts along top of Sleeve, and 17[17, 18, 18, 19, 19, 20, 20, 21] sts along Left Front Neck. 89[89, 93, 93, 97, 97, 101, 101, 105] sts.

Work in Broken Ribbing patt for 3.5 inches/9 cm.

BO all sts, leaving a long tail for sewing.

Zipper
With crochet hook and MC1 only, work a line of slip stitches along Left and Right fronts (including Collar) through the outermost edge st. (See below)

Measure sweater from the bottom edge to halfway up the collar. Shorten your zipper to this length. Pin the zipper to each front using plenty of pins. Baste the side of each zipper to each front with contrasting thread. Sew in place by machine or hand using matching thread and short stitches. Remove basting thread. Fold Collar in half over the zipper and sew the BO edge inside the sweater at the Collar pick-up edge. Sew sides of Collar to zipper. (See below)

A – Back Width at Waist: 13.5[15.75, 18, 19.75, 22, 23.75, 26, 27.75, 30] inches/ 34.5[40, 45.5, 50, 56, 60.5, 66, 70.5, 76] cm
B – Back Width at Chest: 17[19.25, 21.5, 23.25, 25.5, 27.25, 29.5, 31.25, 33.5] inches / 43[49, 54.5, 59, 65, 69, 75, 79.5, 85] cm
C – Front Width at Waist: 6.75[8, 9, 10, 11, 12, 13, 14, 15] inches / 17[20.5, 23, 25.5, 28, 30.5, 33, 35.5, 38] cm
D – Front Width at Chest: 8.5[9.75, 10.75, 11.75, 12.75, 13.75, 14.75, 15.75, 16.75] inches / 21.5[25, 27.5, 30, 32.5, 35, 37.5, 40, 42.5] cm
E – Body Length to Underarm: 10[10, 10.75, 10.75, 10.75, 11.25, 11.25, 11.25, 11.5] inches / 25.5[25.5, 27.5, 27.5, 27.5, 28.5, 28.5, 28.5, 29] cm
F – Raglan Depth: 6.25[7, 7.75, 8, 8.5, 9.25, 9.75, 10, 10.75] inches / 16[18, 19.5, 20.5, 21.5, 23.5, 25, 25.5, 27.5] cm
G – Back Neck Width:  6[6, 6.5, 6.5, 6.75, 6.75, 7.25, 7.25, 7.75] inches / 15[15, 16.5, 16.5, 17, 17, 18.5, 18.5, 19.5] cm
H – Cuff Width: 9[9.5, 9.5, 10, 10, 10.5, 10.5, 11, 11] inches / 23[24, 24, 25.5, 25.5, 26.5, 26.5, 28, 28] cm
I – Upper Arm Width:  12.25[13.5, 14.5, 15.25, 16.25, 17.5, 18.5, 19.25, 20.25] inches / 31[34.5, 37, 38.5, 41.5, 44.5, 47, 49, 51.5] cm
J – Sleeve Length to Underarm:  16.5[16.5, 16.75, 16.75, 17, 17, 17.25, 17.25, 17.5] inches / 42[42, 42.5, 42.5, 43, 43, 44, 44, 44.5] cm

ABOUT THE DESIGNER

Amy has been crazy for yarn ever since she had some down time in between pizza making back in Iowa. She's been the creative director for Universal Yarn, yarn director for Jimmy Beans Wool, and has done knit and crochet designs for most major magazines. She also does freelance design work, technical editing, crochet chart making, and many other assorted yarny things. When she's not busy with fiber, she's probably playing tennis, at the dog park, or sitting in the corner being antisocial.

Pattern & images © 2023 Amy Gunderson