DROPS Snow
DROPS Snow
100% Wool
from 2.65 $ /50g
Get the yarn to make this pattern from 18.55$.

The yarn cost is calculated from the pattern’s smallest size and the yarn’s cheapest product type. Looking for an even better price? You might find it on the DROPS Deals!

DROPS Super Sale
DROPS Baby 16-15
Size: 1/3 - 6/9 - 12/18 months (2 – 3/4) years
Finished measures:
Bust: 56-64-68 (76-84) cm [22”-25 ¼”-26 ¾” (30”-33”)]
Full length: 55-64-73 (79-85) cm [21 5/8”-25¼”-28¾” (31”-33½”)]

Materials: DROPS SNOW from Garnstudio
350-350 400 (450-500) g color no 01, off-white

DROPS DOUBLE POINTED AND CIRCULAR NEEDLE (60 cm [24’’]) size 7 mm [US 10½] – or size needed to get 12 sts x 16 rows in stockinette st = 10 x 10 cm [4’’ x 4’’].
DROPS WOODEN BUTTON no 501: 5-5-5 (6-6) pcs

-------------------------------------------------------

Alternative Yarn – See how to change yarns here
Yarn Groups A to F – Use the same pattern and change the yarn here
Yarn usage using an alternative yarn – Use our yarn converter here

-------------------------------------------------------

DROPS Snow
DROPS Snow
100% Wool
from 2.65 $ /50g
Get the yarn to make this pattern from 18.55$.

The yarn cost is calculated from the pattern’s smallest size and the yarn’s cheapest product type. Looking for an even better price? You might find it on the DROPS Deals!

DROPS Super Sale

SAVE 30% on 6 cotton favorites!
Valid until 04.12.2024

Pattern instructions

NOTE: This pattern is written in American English. All measurements in charts are in cm. For conversion from inches to cm - click here. There are different terms for crocheting in American and British English. If this pattern includes crochet, click for "crochet terms" here. For this pattern in British English, please click here.
GARTER ST (in the round): K 1 round, P 1 round.

GARTER ST (back and forth on needle): K all rows.

INCRTEASING TIP: Inc 1 st by making 1 YO. Work YO into back of loop on return row to avoid a hole.

BUTTONHOLES: Bind off for buttonholes on right front piece.
1 BUTTONHOLE = bind off 3rd st from mid front and cast on 1 new st on return row. Bind off for buttonholes when piece measures:
SIZE 1/3 months: 22, 29, 36, 43 and 49 cm [8¾”, 11 3/8”, 14¼”, 17”, 19¼”]
SIZE 6/9 months: 26, 34, 42, 50 and 58 cm [10¼”, 13 3/8”, 16½”, 19¾”, 22¾”]
SIZE 12/18 months: 30, 39, 48, 57 and 66 cm [11¾”, 15¼”, 19”, 22½”, 26”]
SIZE 2 year: 33, 41, 49, 57, 65 and 72 cm [13”, 16 1/8”, 19¼”, 22½”, 25½”, 28 3/8”]
SIZE 3/4 year: 41, 48, 56, 63, 71 and 78 cm [16 1/8”, 19”, 22”, 24¾”, 28”, 30¾”]
----------------------------------------------------------
----------------------------------------------------------
JUMPSUIT:
Worked from bottom up on double pointed and circular needle. Beg at bottom of left leg!

LEFT LEG:
Worked in the round on double pointed needles.
Cast on 26-28-30 (34-36) sts on needle size 7 mm [US 10½] with Snow. Work 5 cm [2’’] garter st – SEE ABOVE. Continue in stockinette st – insert a marker at beg of round (= inside of leg).
REMEMBER THE KNITTING GAUGE!
When piece measures 10 cm [4’’] inc 1 st on each side of marker - SEE INCREASING TIP. Repeat the inc on every 2-2-2½ (3-4) cm [3/4”-3/4”-7/8” (1 1/8”-1½”)] a total of 4-5-6 (6-7) times = 34-38-42 (46-50) sts.
When piece measures 20-23-27 (30-38) cm [8”-9”-10 5/8” (11¾”-15”)] bind off 2 sts to the left of marker (= towards back of leg) = 32-36-40 (44-48) sts. Slip sts on a stitch holder.

RIGHT LEG:
Cast on and work like left leg, but mirrored, i.e. bind off 2 sts to the right of marker at the top.

JUMPSUIT:
Cast on 4 sts (= towards mid front) on circular needle size 7 mm [US 10½], work right leg in on circular needle, work left leg in on circular needle and then cast on 4 new sts at the end of round (= towards mid front) = 72-80-88 (96-104) sts.
Insert 2 markers in piece, 19-21-23 (25-27) sts in from each side (to mark the sides).
Continue in stockinette st back and forth on circular needle from mid front with 6 garter sts each side towards mid front (= front bands). REMEMBER TO BIND OFF FOR BUTTONHOLES – SEE ABOVE.
When piece measures 43-51-59 (64-69) cm [17”-20”-23¼” (25¼”-27 1/8”)] divide the piece by markers and slip both front pieces on a stitch holder.

BACK PIECE:
= 34-38-42 (46-50) sts. Now cast on new sts each side for sleeves. Loosely cast on at the end of every row: 4 sts 2-2-3 (3-3) times and 10-11-10 (14-18) sts 1 time = 70-76-86 (98-110) sts. Continue in stockinette st with 5 garter sts each side (= sleeve edges).
When piece measures 53-62-71 (77-83) cm [21”-24 3/8”-28” (30 3/8”-32¾”)] bind off the middle 8-10-10 (12-12) sts for neck and complete each side separately. Bind off 1 st on neckline on next row = 30-32-37 (42-48) sts left on shoulder/sleeve. Bind off all sts when piece measures 55-64-73 (79-85) cm [21 5/8”-25¼”-28¾” (31”-33½”)].

LEFT FRONT PIECE:
= 19-21-23 (25-27) sts. Slip sts back on needle and cast on for sleeve at the side as described for back piece = 37-40-45 (51-57) sts. When piece measures 51-60-68 (74-80) cm [20”-23 5/8”-26¾” (29 1/8”-31½”)] bind off to shape the neckline towards mid front at the beg of every row: 6 sts 1 time and 1 st 1-2-2 (3-3) times = 30-32-37 (42-48) sts left on shoulder/sleeve. Bind off all sts when piece measures approx 55-64-73 (79-85) cm [21 5/8”-25¼”-28¾” (31”-33½”)] – adjust to back piece.

RIGHT FRONT PIECE:
Like left front piece, but mirrored – remember buttonholes!

ASSEMBLY:
Sew shoulder and upper arm seams, edge to edge. Sew under arm seams. Place right front band over left front band at bottom of front pieces and fasten. Sew opening between legs.

COLLAR:
Pick up approx 26-30-32 (34-38) sts round neckline on circular needle size 7 mm [US 10½] with Snow. NOTE: Do not pick up on front bands. Insert a marker on each shoulder. Work garter st back and forth on needle, AT THE SAME TIME inc 1 st on each side of both markers on every 4th row – SEE INCREASING TIP! Bind off when collar measures 5-5-6 (6-7) cm [2”-2”-2 3/8” (2 3/8”-2 ¾”)].
Sew on buttons.
Fold approx 5 cm [2’’] towards RS at bottom of both legs.

Diagram

All measurements in charts are in cm.

diagram measurements
Do you have a question? See a list of frequently asked questions (FAQ)

Knitting tension is what determines the final measurements of your work, and is usually measured per 10 x 10 cm. It is provided like so: number of stitches in width x number of rows in height - eg: 19 stitches x 26 rows = 10 x 10 cm.

The knitting tension is very individual; some people knit/crochet loosely while others work tightly. You adjust the knitting tension with the needle size, which is why the suggested needle size only serve as a guide! You need to adjust this (up or down) to ensure that YOUR knitting tension matches the knitting tension provided in the pattern. If you work with a different knitting tension than provided you will have a different yarn consumption, and your work will have different measurements than what the pattern suggests.

The knitting tension also determines which yarns can replace each other. As long as you achieve the same knitting tension you can replace one yarn with another.

See DROPS lesson: How to measure your tension/gauge

See DROPS video: How to make a gauge tension swatch

The required amount of yarn is provided in grams, eg: 450 g. To calculate how many balls you’ll need you first need to know how many grams are in 1 ball (25g, 50g or 100g). This information is available if you click on the individual yarn quality on our pages. Divide the amount required with the amount of each ball. For example, if each ball is 50g (the most common amount), the calculation will be as follows: 450 / 50 = 9 balls.

The important thing when changing from one yarn to another is that the knitting/crochet tension remains the same. This is so that the measurements of the finished piece will be the same as on the sketch provided. It is easier to achieve the same knitting tension using yarns from the same yarn group. It is also possible to work with multiple strands of a thinner yarn to achieve the knitting tension of a thicker one. Please try our yarn converter. We recommend you to always work a test swatch.

Please NOTE: when changing yarn the garment might have a different look and feel to the garment in the photo, due to individual properties and qualities of each yarn.

See DROPS lesson: Can I use a different yarn than the one mentioned in the pattern?

All our yarns are categorised into yarn groups (from A to F) according to thickness and knitting tension – group A contains the thinnest yarns and group F the thickest. This makes it easier for you to find alternative yarns to our patterns, should you wish to switch yarn. All yarns within the same group have a similar knitting tension and can easily replace each other. However, different yarn qualities have different structures and properties which will give the finished work a unique look and feel.

Click here for an overview of the yarns in each yarn group

At the top of all our patterns you’ll find a link to our yarn converter, which is a helpful tool should you wish to use a different yarn than suggested. By filling in the yarn quality you wish to replace, the amount (in your size) and number of strands, the converter will present good alternative yarns with the same knitting tension. Additionally it will tell you how much you’ll require in the new qualities and whether you’ll need to work with multiple strands. Most skeins are 50g (some are 25g or 100g).

If the pattern is worked with multiple colours, every colour will have to be converted separately. Similarly, if the pattern is worked with several strands of different yarns (for example 1 strand Alpaca and 1 strand Kid-Silk) you will have to find alternatives for each, individually.

Click here to see our yarn converter

Since different yarns have different qualities and textures we have chosen to keep the original yarn in our patterns. However, you can easily find options among our available qualities by using our yarn converter, or simply pick a yarn from the same yarn group.

It is possible that some retailers still have discontinued yarns in stock, or that someone has a few skeins at home that they would like to find patterns for.

The yarn converter will provide both alternative yarn as well as required amount in the new quality.

If you think it's hard to decide what size to make, it can be a good idea to measure a garment you own already and like the size of. Then you can pick the size by comparing those measures with the ones available in the pattern's size chart.

You'll find the size chart at the bottom of the pattern.

See DROPS lesson: How to read size chart

The needle size provided in the pattern serves only as a guide, the important thing is to follow the knitting tension. And since knitting tension is very individual, you will have to adjust the needle size to ensure that YOUR tension is the same as in the pattern – maybe you’ll have to adjust 1, or even 2 needle sizes, up or down to achieve the correct tension. For this, we recommend that you work test swatches.

Should you work with a different knitting tension than the one provided, the measurements of the finished garment might deviate from the measurement sketch.

See DROPS lesson: How to measure your tension/gauge

See DROPS video: How to make a gauge tension swatch

Working a garment top-down provides more flexibility and room for personal adjustment. For example it is easier to try the garment on while working, as well as making adjustments to length of yoke and shoulder caps.

The instructions are carefully explaining every step, in the correct order. Diagrams are adjusted to the knitting direction and are worked as usual.

The diagram depicts all rows/rounds, and every stitch seen from the right side. It is read from bottom to top, from right to left. 1 square = 1 stitch.

When working back and forth, every other row is worked from the right side and every other row is worked from the wrong side. When working from the wrong side, the diagram will have to be worked reversed: from left to right, knit stitches are purled, purl stitches are knit etc.

When working in the round every round is worked from the right side and the diagram are worked from right to left on all rounds.

See DROPS lesson: How to read knitting diagrams

The diagram depicts all rows/rounds, and every stitch seen from the right side. It is worked from bottom to top, from right to left.

When working back and forth every other row is worked from the right side: from right to left and every other row is worked from the wrong side: from left to right.

When working in the round, every row in the diagram are worked from the right side, from right to left.

When working a circular diagram you start in the middle and work your way outwards, counter clockwise, row by row.

The rows usually start with a given number of chain stitches (equivalent to the height of the following stitch), this will either be depicted in the diagram or explained in the pattern.

See DROPS lesson: How to read crochet diagrams

Instructions for working several diagrams after each other on the same row/round, will often be written like so: “work A.1, A.2, A.3 a total of 0-0-2-3-4 times". This means you work A.1 once, then A.2 is worked once, and A.3 is repeated (in width) the number of times provided for your size – in this case like so: S = 0 times, M = 0 times, L=2 times, XL= 3 times and XXL = 4 times.

The diagrams are worked as usual: begin with the first row in A.1, then work the first row in A.2 etc.

See DROPS lesson: How to read knitting diagrams

See DROPS lesson: How to read crochet diagrams

The total width of the garment (from wrist-to-wrist) will be larger in the larger sizes, despite the actual sleeves being shorter. The larger sizes have longer sleeve caps and wider shoulders, so there will be a good fit in all sizes.

The measurement sketch/schematic drawing provides information regarding the full length of the garment. If it’s a jumper or a jacket the length is measured from the highest point on the shoulder (usually closest to the neckline), and straight down to the bottom of the garment. It is NOT measured from the tip of shoulder. Similarly, the length of yoke is measured from the highest point on the shoulder and down to where yoke is split into body and sleeves.

See DROPS lesson: How to read a schematic drawing

Diagrams are often repeated on the round or in height. 1 repeat is the diagram the way it appears in the pattern. If it says to work 5 repeats of A.1 in the round, then you work A.1 a total of 5 times after/next to each other in the round. If it says to work 2 repeats of A.1 vertically/in height you work the entire diagram once, then begin again at the start and work the entire diagram one more time.

Chain stitches are slightly narrower than other stitches and to avoid working the cast-on edge too tight, we simply chain more stitches to begin with. The stitch count will be adjusted on the following row to fit the pattern and measurement sketch.

The rib edge is more elastic and will contract slightly compared to, for example, stocking stitch. By increasing before the rib edge, you avoid a visible difference in width between the rib edge and the rest of the body.

It’s very easy to cast off too tightly, and by making yarn overs while casting off (and simultaneously casting these off) you avoid a too tight cast off edge.

See DROPS video: How to bind off with yarn overs (yo)

To achieve an even increase (or decrease) you can increase on, for example: every 3rd and 4th row alternately, like so: work 2 rows and increase on the 3rd row, work 3 rows and increase on the 4th. Repeat this until the increase is complete.

See DROPS lesson: Increase or decrease 1 st on every 3rd and 4th row alternately

Should you prefer to work in the round instead of back and forth, you may of course adjust the pattern. You’ll need to add steeks mid-front (usually 5 stitches), and follow the instructions. When you would normally turn and work from the wrong side, simply work across the steek and continue in the round. At the end you’ll cut the piece open, pick up stitches to work bands, and cover the cut edges.

See DROPS video: How to knit steeks and cut open

Should you prefer to work back and forth instead of in the round, you may of course adjust the pattern so you work the pieces separately and then assemble them at the end. Divide the stitches for the body in 2, add 1 edge stitch in each side (for sewing) and work the front and back pieces separately.

See DROPS lesson: Can I adapt a pattern for circular needles into straight needles?

Pattern repeats can vary slightly in the different sizes, in order to get the correct proportions. If you’re not working the exact same size as the garment in the photo, yours might deviate slightly. This has been carefully developed and adjusted so that the complete impression of the garment is the same in all sizes.

Make sure to follow instructions and diagrams for your size!

If you have found a pattern you like which is available in women’s size it’s not very difficult to convert it to men’s size. The biggest difference will be the length of sleeves and body. Start working on the women size that you think would fit across the chest. The additional length will be worked right before you cast off for the armhole/sleeve cap. If the pattern is worked top-down you can add the length right after the armhole or before the first decrease on sleeve.

Regarding additional yarn amount, this will depend on how much length you add, but it is better with a skein too many than too few.

All yarns will have excess fibres (from production) that might come off as lint or shedding. Brushed yarns (ie hairier yarns) have more of these loose, excess fibres, causing more shedding.

Shedding also depends on what is worn under or over the garment, and whether this pulls at the yarn fibres. It’s therefore not possible to guarantee that there will be no shedding

Below are some tips on how to get the best result when working with hairier yarns:

1. When the garment is finished (before you wash it) shake it vigorously so the looser hairs come off. NOTE: do NOT use a lint roller, brush or any method that pulls at the yarn.

2. Place the garment in a plastic bag and put it in your freezer - the temperature will cause the fibres to become less attached to each other, and excess fibres will come off easier.

3. Leave in the freezer for a few hours before taking it out and shaking it again.

4. Wash the garment according to the instructions on the yarn label.

Pilling is a natural process that happens to even the most exclusive of fibers. It's a natural sign of wear and tear that is hard to avoid, and that is most visible in high friction areas of your garment like a sweater's arms and cuffs.

You can make your garment look as new by removing the pilling, using a fabric comb or a pill/lint remover.

Still can't find the answer you need? Then scroll down and leave your question so one of our experts can try to help you. This will be done normally within 5 to 10 working days.
In the meantime, you can read the questions and answers that others have left to this pattern or join the DROPS Workshop on Facebook to get help from fellow knitters/crocheters!

You might also like...

Post a comment to pattern DROPS Baby 16-15

We would love to hear what you have to say about this pattern!

If you want to leave a question, please make sure you select the correct category in the form below, to speed up the answering process. Required fields are marked *.

Comments / Questions (31)

country flag Elina wrote:

This size 86/92 was huge for my 1,5 year-old.

03.01.2024 - 08:22

country flag Elise wrote:

Hei! Hvordan syr saman skulder- og overarmssømmane kant i kant? Tusen takk for hjelpen!

17.02.2023 - 00:38

DROPS Design answered:

Hej Elise, du finder mange monteringsvideoer som passer til nederst i opskriften :)

23.02.2023 - 14:57

country flag Vera Rama wrote:

Hallo, also sollte nicht zum Schluss der Schritt ein wenig zugenäht werden?

04.10.2022 - 21:12

DROPS Design answered:

Liebe Frau Rama, ja sicher und danke für den Hinweis, das schreiben wir noch dazu. Viel Spaß beim stricken!

06.10.2022 - 07:42

country flag Aurélie wrote:

Bonjour, Dans les explications, je ne comprends pas le moment, où il faut tricoter les jambes, après avoir monter les 4 mailles. Faut-il tricoter la jambe en entier ? Ou bien rabattre des mailles et le tricoter comme l'assemblage des manches dans le modèle little baby jack ? Je demande celà, parce qu'il est demandé de coudre l'entrejambe à la fin du tricot. Merci d'avance.

31.01.2021 - 17:39

DROPS Design answered:

Bonjour Aurélie, lorsque vous avez monté les 4 mailles du milieu devant, tricotez les mailles de la jambe droite, puis celles de la jambe gauche et terminez par monter 4 mailles. Vous avez maintenant toutes les mailles des 2 jambes sur la même aiguille. À la fin, vous fermerez la petite ouverture qu'il y aura entre les 2 jambes par une couture - les 2 mailles rabattues (et non diminuées, correction faite, merci pour votre retour) de chaque jambe. Bon tricot!

01.02.2021 - 10:22

country flag Masome wrote:

Excuse me,I totally confused! I cast on 4sts on circular needles and then knit right leg and left leg.cast on 4sts at the end of round. But now how should I continue? If I knit,the left and right leg will join together.what should I do?😖😖😖

25.11.2020 - 16:39

DROPS Design answered:

Dear Masome, you now work back and forth in stocking stitch with 6 sts in garter stitch on each side, ie after this first row, turn and work as follows: K6, Purl until 6 sts remain, K6 - and knit all stitches from RS. Happy knitting!

25.11.2020 - 16:51

country flag Masome wrote:

Hello dear I have a question.at the beginning of knitting,we need three double pointed needles or five?

17.11.2020 - 16:21

DROPS Design answered:

Dear Masome, whichever that feels hand for you, but generally, five might be more comfortable. You can also use a shorter circular (60 cm long or so) needle too. Happy Knitting!

17.11.2020 - 22:46

country flag Breda wrote:

Comment avoir le patron sur la boite mail

22.06.2019 - 23:10

DROPS Design answered:

Bonjour Breda, vous pouvez simplement imprimer ce modèle en cliquant sur l'icône "imprimer: Explications", et choisir une imprimante virtuelle pour le sauvegarder en .pdf - ou bien l'ajouter à vos favoris si vous le souhaitez. Bon tricot!

24.06.2019 - 08:39

country flag Anna wrote:

Ich stricke gerade den Overall in Größe 86 und weiß bei den Zunahmen für die Ärmel nicht weiter.Ich habe beidseitig 3x 4 Maschen zugenommen und habe nun 74 maschen auf der Nadel.Wie geht es jetzt weiter? In der anleitung stehen diese zahlen: 10-11-10 (14-18) M. 1 Mal = 70-76-86 (98-110) M.) Damit kann ich nichts anfangen. Wieviel Maschen muss ich links und rechts desw Rückens zunehmen und wieviele Reihen muss ich stricken?LG Anna

15.12.2017 - 10:46

DROPS Design answered:

Liebe Anna, beim Rückenteil müssen die Maschen für die Ärmel am Ende jeder Reihe angeschlagen werden, dh 3 x 4 M auf beiden Seiten (= insgesamt 12 M x 2 Seiten = 24 neue Maschen) + 1 x 14 M auf beiden Seiten (= insgesamt 14 M x 2 Seiten = 25 neue Maschen), dann haben Sie: 46 M + 24 M + 28 M = 98 M. Viel Spaß beim stricken!

15.12.2017 - 11:09

country flag Anna Bruch wrote:

Ich würde den Anzug gerne filzen und frage mich, in welcher Größe ich ihn dann stricken muss, damit er nach dem Filzen Größe 50/56 hat.

22.11.2017 - 12:03

DROPS Design answered:

Liebe Frau Bruch, wir können leider jeder unserer Anleitung nach jeder Anfrage anpassen, der Anzug wird hier nicht gefilzt, Sie sollen Ihre Maschenprobe vor/nach Filzen stricken bzw messen und damit die Anleitung anpassen. Es wird aber schon dicker, nehmen Sie bitte Kontakt mit Ihrem DROPS Händler auf, gerne werden sie Ihnen weiterhelfen. Viel Spaß beim stricken!

22.11.2017 - 17:37

country flag Deborah Armstrong wrote:

When casting on new stitches on the left front piece I don't understand the directions. If I follow as per back piece than the total number of stitches don't add up. Example... There are 21 stitches on my needle to begin...if I add 4 to both ends that will be 16 which is a total of 37. Then I add on 11 sts one time on both ends which will be 22 for a total of 59. The pattern says I should have 40 stitches. Please clarify. And thank you very much for your lovely patterns.

12.09.2015 - 11:55

DROPS Design answered:

Dear Mrs Armstrong, when working left front piece you will cast on sts for sleeve on one side only (towards back piece and no sts cast on towards mid front): 21 sts + (2 x 4 sts) + 11 sts= 40 sts. Happy knitting!

14.09.2015 - 09:03